Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto Classic Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Codes for Hunter Douglas blinds don't work...
This thread has 1 response. Displaying all posts.
Post 1 made on Tuesday March 13, 2012 at 20:26
Jim1
Lurking Member
Joined:
Posts:
March 2011
9
I have older Hunter Douglas power rise blinds (bought about 2004, just IR, no RF). I located what seemed to be the proper codes here:

[Link: remotecentral.com]

However, when I ran them through pronto2lirc to make an LIRC config file it complained the data length did not match the length bytes in the data. Someone more familiar with pronto codes than me said:

It says that there are 0x0000 + 0x009c = 0 + 156
= 156 burst pairs; but in fact there are only 38.

Can anyone help with this? I don't have a pronto remote but thought I might get an LIRC file this way. I have been unable to record the codes directly with LIRC tools, I think because there are only 4 different codes and it can't figure out the basic encoding without more codes.
Post 2 made on Wednesday March 14, 2012 at 17:26
3FG
Select Member
Joined:
Posts:
August 2009
1,861
Start by simply changing 009C to 0026 in each of the 4 Pronto Hex.  If that doesn't work,  post back.

Edit:
Hunter Douglas published the following Pronto Compatible IR Hex Codes
Channel 1 Up 
0000 0067 0000 0005 006B 006B 0028 0028 0028 006B 0028 0028 0028 0071 
Channel 1 Down 
0000 0066 0000 0005 006C 006C 0028 0028 0028 006C 0028 006C 0028 002E 
Channel 2 Up 
0000 0066 0000 0005 006C 006C 0028 006C 0028 0028 0028 0028 0028 0072 
Channel 2 Down 
0000 0066 0000 0005 006C 006C 0028 006C 0028 0028 0028 006C 0028 002E

These should work, although they say the OEM remote will send this signal repeatedly for 300 mS minimum.  These will only send for about 20mS or so, if you could release the button quick enough.  
[Link: automatedshadeinc.com]

Last edited by 3FG on March 14, 2012 20:05.

Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse