Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto Classic Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Marantz RC5200 : 3-digit code
This thread has 3 replies. Displaying all posts.
Post 1 made on Monday May 2, 2011 at 19:13
njcunha
Lurking Member
Joined:
Posts:
December 2006
3
How to enter 3-digit code into my RC5200 remote? I have an old universal remote that accept these codes, and Marantz doesn't.
Post 2 made on Monday May 2, 2011 at 20:28
Jasonvp
Select Member
Joined:
Posts:
July 2008
2,404
You have to learn the codes or search for them in the database or the files section here on RC.
Post 3 made on Friday May 6, 2011 at 16:27
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,604
You might want to start with the Pronto FAQ and then have a look at the manual for TouchScreenSetup (Files section) which you must use to program the remote via a Computer.
Lyndel McGee
Philips Pronto Addict/Beta Tester
Post 4 made on Tuesday July 19, 2011 at 17:26
Ernie Bornn-Gilman
Yes, That Ernie!
Joined:
Posts:
December 2001
29,768
The "three digit code" approach is used with many brands and models of remote that have many many sets of IR codes stored in memory. The "Six In One" or cable company remote is typical of that type. The particular button pushes and three digit code that you use retrieves these codes from memory and maps them onto buttons on the remote.

The Marantz remote is a totally different animal. It came from the factory filled with [only] Marantz codes, but it can be totally erased and programmed from the start. In fact, that's almost how I'd recommend that you do it.

Here's what I like: look around in the Files section for a system setup that you like, and modify it. Consult the FAQs about this.

Yes, you must download Marantz Touch Screen Setup (TSS) to program the remote.

DO NOT EVER try to stop a download in the middle, even if the software shows a button you can click on labeled "Cancel." That almost always throws the remote into a mode where you have to work hard to reflash the firmware, or to reload a .ccf. The process for both is found in the FAQs. There's more on this at [Link: remotecentral.com].
A good answer is easier with a clear question giving the make and model of everything.
"The biggest problem in communication is the illusion that it has taken place." -- G. “Bernie” Shaw


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse