| Post 1 made on Thursday April 30, 2009 at 08:18 |
thefish Founding Member |
Joined:
Posts: | September 2001
1,721 |
|
|
I went to a project yesterday with a TSU6000. Needed to update the remote as we changed out a CD player.
Tried to connect to the remote, but it would not connect.
I had the tip/ring/sleeve to DB9 cable, pligged into my Dell I6400 bia a ATEN USB adapter (actually tried 2 different USB adapters)
When I tried to extract the program from the remote, I got the "no connection" error.
Any ideas?
|
|
| Post 2 made on Friday May 1, 2009 at 16:40 |
Lyndel McGee RC Moderator |
Joined:
Posts: | August 2001
12,994 |
|
|
See the FAQ about a Keyspan USB Adapter. Note that your adapter must be set to have a COM port ID which is the first available in the system. For example, if it is set as COM4 and COM1,2,3 are not present, the adapter must be configured as COM1. If set as COM4 and COM1 is present, configure the adapter as COM2.
If you still need help, you may want to try a search for +USB +COM as this topic has been discussed before.
|
Lyndel McGee
Philips Pronto Addict/Beta Tester
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
