Post 1 made on Monday September 26, 2005 at 16:15 |
fooman Lurking Member |
Joined: Posts: | September 2005 3 |
|
|
My Pronto TSU2000 will not learn the IR codes from Samsung SIR-S4080R Directv/DVR. Any Ideas on what to try.
|
|
Post 2 made on Monday September 26, 2005 at 16:46 |
bomberjim Super Member |
Joined: Posts: | September 2001 3,894 |
|
|
The common problem is that you're learning to the wrong end of the pronto, the learning eye is on the rear of the remote.
Failing that being the problem, you could try the file section to see if the codes are availlable for that or a similar model. If you still want to learn, try some of the tips and tricks to learning IR codes in the features section.
|
Jim L |
|
OP | Post 3 made on Monday September 26, 2005 at 17:12 |
fooman Lurking Member |
Joined: Posts: | September 2005 3 |
|
|
I am using the correct end of the Pronto. i finally got the number 1 to work. The IR code is long. i tried number 2 amd 3 but only has a short ir code. Any idea???
|
|
Post 4 made on Monday September 26, 2005 at 17:26 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 12,992 |
|
|
Yes, do short button presses on the OEM remote to learn. Don't press and hold unless absolutely necessary.
The FAQ has tips about learning. You might want to check it out as there's much more there than just info about learning codes.
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.