Post 1 made on Wednesday September 14, 2005 at 21:06 |
mx6 Lurking Member |
Joined: Posts: | September 2005 1 |
|
|
Hi, I Just purchase this remote (second hand) and i want to reset to factory default but the revert button in the setup menu is pale gray (disable kind of) any body know what to do enable this fonction.
Thank you.
|
|
Post 2 made on Wednesday September 14, 2005 at 21:35 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 12,992 |
|
|
Download and install ProntoEdit 4.0 from the files section. Reboot your PC to get fonts installed correctly.
Next, open ProntoEdit4 and then select Tools->Update Firmware and choose your model. From there, the firmware will update. It will ask you do you want to keep your current config. You should respond with 'No'. Doing this should download the original factory default configuration.
Then, when you develop your own configuration, ensure that under the HOME->System Properties node in the tree view of your configuration, that the checkbox about setting this configuration as the factory default is unchecked.
Lyndel
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.