Post 1 made on Monday April 18, 2005 at 14:27 |
My TSU 6000 docking station's LEDs no longer light up when charging. (They started blinking when the remote was out of the dock, but no longer do that either). The battery level is very low. How can I tell if this is a charger or a battery problem?
|
|
Post 2 made on Monday April 18, 2005 at 16:04 |
bomberjim Super Member |
Joined: Posts: | September 2001 3,894 |
|
|
Even without the remote on the dock, the charger lights should glow faintly - turn out the lights and check this.
If they don't glow, it's either the wall transformer that's bad (less likely) or the dock.
If the wall transformer is warm to the touch when it's been plugged in a while, it's most likely OK. If it's the dock itself that's bad - the most common problem is the internal, solid state fuze is blown. You can do a forum search for more info (lots of threads on the fuze) and either repair it yourself or take it to an electronics repair shop.
|
Jim L |
|
OP | Post 3 made on Monday April 18, 2005 at 16:18 |
Thanks, Jim. I'll double check the LEDs before taking it apart (the transformer is very slightly warm).
|
|
Post 4 made on Monday April 18, 2005 at 21:33 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 13,001 |
|
|
See this thread. [Link: remotecentral.com]
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.