I have a weird problem with a TSU2000. The unit powers itself off based on the time the LCD is set to display. If I have it at 30 seconds, the remote shuts off after 30 secs. I set it to 240 secs and the remote powers off after 240 sec (unless I'm pressing keys. Once I stop, it shuts down after the # of secs).
I've tried to reflash, but it won't communicate with ProntoEdit. I can't upload a ccf or download the existing ccf either, however, if I run a terminal session, I can see the unit rebooting and see the version, etc.
===== 00 02 04 10 12 14 16 18 BOOT,400000[00],UDB V3.0 AMD S2 ,09/20/2000,17:24:57,CRC OK 20 PSOS,404000[02],V1.0 ,06/19/2001,09:53:47,CRC OK 30 _SYS,410000[08],UDB V4.8 ,06/19/2001,09:54:22,CRC OK 60 _APP,440000[11],UDB V5.3 ,06/19/2001,09:56:28,CRC OK 40 _CCF,4b1000[18],N/A ,02/26/2005,22:25:07,CRC SKP 52 _UDB,5a0000[33],v1.02 C 0 CSF P v1.0,08/10/2000,14:46:47,CRC OK 70 74 78 80 92 82 84 86 88 90 94 96 98
LZO real-time data compression library (v1.04, Mar 15 1998). Copyright (C) 1996, 1997, 1998 Markus Franz Xaver Johannes Oberhumer
using embedded fonts font 0 = Pronto 8 font 1 = pronto10 font 2 = Pronto 12 font 3 = Pronto 14 font 4 = Pronto 16 font 5 = Pronto 18
_CCF,sr v1.0 [02/26/2005 22:25]
=====
Pressing (esc) should get me to a prompt, but no luck there either.
FWIW, I just picked up a Harmony 676 last week and it's nowworking great, but I hate to see the Pronto die. Besides, I still have all the discrete codes, little hacks, and such and I would like to still use it, even tho the wife actually _likes_ the Harmony :)
Any suggestions?
thanks,
|