Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto Classic Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Yamaha HTR-5640
This thread has 5 replies. Displaying all posts.
Post 1 made on Monday June 21, 2004 at 17:19
barama
Lurking Member
Joined:
Posts:
June 2004
2
Hey, could someone help me find IR codes for the Yamaha HTR5640 receiver. Yamaha told me I could also use RX-V440 codes. I need the raw pronto codes so I can dump them into Premise Home Control or a CCF with a program to pull out the codes for me. I'd really appreciate the help.

Thanks,
Bruce
Post 2 made on Monday June 21, 2004 at 17:38
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,306
Bruce, Try the RX-v800, RX-v900, or RX-V1 files from this site. Yamaha has been pretty good about keeping the same extended IR codes between receivers.

Lyndel
Lyndel McGee
Philips Pronto Addict/Beta Tester
OP | Post 3 made on Tuesday June 22, 2004 at 15:57
barama
Lurking Member
Joined:
Posts:
June 2004
2
I finally got the codes I needed for the Yamaha. Except I can't find the code for Night Mode. It would be useful for the home automation. All the rest I either found or decoded with IR Tool with the Yamaha code pdf. Be aware that IR Tool 1.2 has a bug and it doesn't work with my model (HTR-5640 and probably most other Yamahas). I had to play guessing games to find out what was wrong and correct it. When I finish it I will post the IR code list for it.
Post 4 made on Tuesday June 22, 2004 at 19:41
Impaqt
RC Moderator
Joined:
Posts:
October 2002
5,876
The 5640 Is an RX-V440. No Need to reinvent the wheel. They are Identical receivers with different model numbers. They are just sold through different chains..........

Remote codes havebnt changed onYamaha receivers in qwuite some time (3-4 generations...) so any 20/30/40 series remote will work.

If you look at the yamaha website discription for the 5640, you'll find a couple places where the "Search and replace" missed the RX-V440 even.......

I'm no engineer, but I did stay at a Motel 6 last night!
Post 5 made on Monday August 12, 2019 at 22:58
xekon
New Member
Joined:
Posts:
August 2019
1
On June 22, 2004 at 15:57, barama said...
I finally got the codes I needed for the Yamaha. Except I can't find the code for Night Mode. It would be useful for the home automation. All the rest I either found or decoded with IR Tool with the Yamaha code pdf. Be aware that IR Tool 1.2 has a bug and it doesn't work with my model (HTR-5640 and probably most other Yamahas). I had to play guessing games to find out what was wrong and correct it. When I finish it I will post the IR code list for it.

could you please share what codes you have for the HTR-5640, I would very much appreciate it, thank you!
Post 6 made on Wednesday August 14, 2019 at 23:21
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,306
You can likely find what you need in the Classic Pronto Files section under the RX-V800 model (Equivalent to HTR 5280) or the RX-V1. Yamaha reuses the same IR codes across all their receivers. What you may find is that some of the function names are different.

Here are a few samples that should get you going.

[Link: files.remotecentral.com]

[Link: files.remotecentral.com]
Lyndel McGee
Philips Pronto Addict/Beta Tester


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse