Post 1 made on Tuesday March 16, 2004 at 23:44 |
Michael Clarke Long Time Member |
Joined: Posts: | September 2003 169 |
|
|
Similar to the On button on the NEC HT-1000 which has to be held for 2 seconds, The On button on the BenQ PE-8700 projector has to be held for 1 second to turn the projector on. 900a 006d 0000 0001 8d72 00ff is the learned code for the On button. How would one come up with a hold code for this string? Any Help would be greatly appreciated.
|
Ever notice when you are driving that everybody going slower than you is an idiot and everyone going faster than you is a maniac. |
|
Post 2 made on Sunday April 11, 2004 at 18:37 |
Maddmaster Long Time Member |
Joined: Posts: | April 2004 23 |
|
|
I have the TSU1000 and the BenQ PE8700. I added the On button to the TSU1000 and it learned the code with no problem. I also have the BenQ On button programmed in a Macro.
|
|
Post 3 made on Sunday April 11, 2004 at 18:40 |
Maddmaster Long Time Member |
Joined: Posts: | April 2004 23 |
|
|
I have the TSU1000 and added the BenQ PE8700 ON button to the Pronto. It learned the code and works without a problem. When you are sending the code to the Pronto, just hold whe BenQ ON button down for the 1 sec and it'll work.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.