Post 1 made on Wednesday March 10, 2004 at 10:55 |
rhm9 Founding Member |
Joined: Posts: | December 2001 1,347 |
|
|
Anyone hooked one of these up and controlled it with a TSU3000/2000/6000?. Ive got a bizarre problem in menu navigation. The MCPC remote will move up, down and sideways with no problem. I learned the codes into the Pronto and they work fine... for one press! After that it is as if the remote is locked up. You can go a different direction for one press and then you can't subsequently go that direction again.
With menu cursor navigation being the most important part of controlling an MCPC (by the way, this one is a gateway) this obviously has to work.
Anybody got any good ideas?
Thanks in advance.
|
|
Post 2 made on Wednesday March 10, 2004 at 11:11 |
johnsfine IR Expert |
Joined: Posts: | September 2002 5,159 |
|
|
Do a search of the forums here. You'll find your problem and various solutions discussed at great length.
|
|
Post 3 made on Wednesday March 10, 2004 at 11:11 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 12,999 |
|
|
Do a search for "MediaCenter" and "Toggle". There's a registry setting that you must change to eliminate the RC6 Toggle Bit by the new IRBUS.SYS driver.
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.