Post 1 made on Friday March 5, 2004 at 21:41 |
While trying to download to my tsu3000 it froze with "Philips Pronto" on the screen. Nothing works. I tried to reset it with the reset button and also removed the battery for an hour. I cannot upgrade the firmware because it will not connect with my computer. The philips tech was no help. He told me to remove the battery for 12 hours. I'm pretty sure this won't work. ANY HELP OUT THERE.
|
|
Post 2 made on Friday March 5, 2004 at 22:16 |
King of typos Loyal Member |
Joined: Posts: | June 2002 5,281 |
|
|
Like the philips tech said, remove the battery for at least 12 hours. The caps in the pronto can retain any amount of voltage for more than an hour. There for keeping min amount of power to the chip.
If you are still having trouble.
Connect the remote to the pc with the batteries out. Once you tried to connect and the pc is looking for the remote, reconnect the batteries. This will be a reset, which is what the computer is looking for anyways.
Rob
|
|
OP | Post 3 made on Friday March 5, 2004 at 23:11 |
You are the man. Installing the battery while the comp was saerching did it. Thank you
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.