Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto Classic Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 1 of 2
Topic:
Pronto Pro and Philips SBC SP370
This thread has 18 replies. Displaying posts 1 through 15.
Post 1 made on Sunday October 26, 2003 at 13:39
gargoyle
Long Time Member
Joined:
Posts:
February 2003
11
Is it possible to control my SBC SP370 (RF controlled wall outlet) with a Pronto Pro? If so what do I need for that?
Post 2 made on Sunday October 26, 2003 at 17:49
Peter Dewildt
Loyal Member
Joined:
Posts:
July 2001
6,307
If it is controlled using RF only - No. You can only control devices using IR with a Pronto.
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400
Post 3 made on Monday October 27, 2003 at 15:42
haav
Founding Member
Joined:
Posts:
August 2001
170
It is possible!
You need the codes for it and then send it as RF.

I can send you the codes, but I donīt have your email.
Post 4 made on Monday October 27, 2003 at 17:30
Peter Dewildt
Loyal Member
Joined:
Posts:
July 2001
6,307
It is only possible if the SBC SP370 uses exactly the same carrier frequency as the Pronto Pro. Remember that the U.S. and International versions of the Pro use different carrier frequencies.
Peter
Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired)
Pronto 2xTSU9600, RFX9400
Post 5 made on Tuesday October 28, 2003 at 09:57
haav
Founding Member
Joined:
Posts:
August 2001
170
In Europe Pronto Pro and Philps uses 433,92 Mhz.
OP | Post 6 made on Sunday November 9, 2003 at 07:15
gargoyle
Long Time Member
Joined:
Posts:
February 2003
11
The codes received are working!

Thanks a 1000 times

M. Linders


On 10/27/03 15:42, haav said...
It is possible!
You need the codes for it and then send it as
RF.

I can send you the codes, but I donīt have your
email.

This message was edited by gargoyle on 11/09/03 13:56.
Post 7 made on Thursday December 23, 2004 at 08:23
detharding
Lurking Member
Joined:
Posts:
December 2004
4
Hi - I too am using the SBC SP370 and SBC SP375 (RF controlled wall outlet), and would like to control them - incl. the dimmer function of the SP375 - with a Pronto NG .
Would it be possible for you (haav or gargoyle) to post the codes to this thread? If that' not possible or not allowed for some reason, could you send them to me via eMail?
Kind regards an many thanx in advance!
Post 8 made on Wednesday May 18, 2005 at 09:41
tass_stass
Lurking Member
Joined:
Posts:
May 2005
3
I have the same problem: want to use the RU950 with the SP370 (on/off as well as dimmers).

I have codegen.exe and get the codes but cannot get anything to work!

What are the exact steps to get the ru950 to work?

Thanks for your help!

Tassos
Post 9 made on Wednesday April 25, 2007 at 10:47
Rien du Pre
Lurking Member
Joined:
Posts:
June 2005
7
I found this old thread and I have the same question. Does anyone has this code for me??

Many thanks in advance...

/Rien
Post 10 made on Thursday April 26, 2007 at 20:30
haav
Founding Member
Joined:
Posts:
August 2001
170
Check your mail.
Post 11 made on Sunday June 3, 2007 at 12:29
The Swede
Lurking Member
Joined:
Posts:
June 2007
1
Hi Haav
I have the same problem would you be so kind to send the codes to me to or can I get them somewere on the web?

The Swede
Beginner
Post 12 made on Thursday September 27, 2007 at 16:13
blkscorpion
Lurking Member
Joined:
Posts:
September 2007
2
I have the same problem would you be so kind to send the codes to me to or can I get them somewere on the web? Thanks in advance.

-Blkscorpion
Post 13 made on Wednesday January 20, 2010 at 02:19
vws_be
Lurking Member
Joined:
Posts:
January 2010
2
Major bump and same question: where can I get the codes, and how do I go about this?

major thanks in advance!

Steven
Post 14 made on Wednesday January 20, 2010 at 11:23
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
11,899
You may want to email haav. Email addy in profile.

Lyndel
Lyndel McGee
Philips Pronto Addict/Beta Tester
Post 15 made on Monday March 22, 2010 at 16:17
haav
Founding Member
Joined:
Posts:
August 2001
170
On January 20, 2010 at 02:19, vws_be said...
Major bump and same question: where can I get the codes, and how do I go about this?

major thanks in advance!

Steven

Check your mail and send the codes as RF.

haav
Page 1 of 2


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse