Your Universal Remote Control Center
RemoteCentral.com
One For All & Radio Shack Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
UEI 1056B01 volume problem
This thread has 4 replies. Displaying all posts.
Post 1 made on Tuesday January 22, 2013 at 00:43
alehman
Lurking Member
Joined:
Posts:
January 2013
3
My Universal Electronics 1056B01 furnished by Time Warner Cable has an issue with the volume down button. There is a 1-2 second delay after pressing the button before it starts to activate the volume on the TV. Then it's in rapid decrease mode and it overshoots before I can release the button. There's no way to turn the volume down by a small amount. The The TV light on the remote also doesn't come on until it starts.

Volume up works fine.

The TV is Sony. I've tried several Sony codes, but no change. I've tried disabling volume lock.

Any other ideas?

Thanks,
Alan
Post 2 made on Tuesday January 22, 2013 at 23:02
3FG
Select Member
Joined:
Posts:
August 2009
1,859
Try making sure that there are no keymoves or macros assigned to the Vol- button.  In TV mode,
1) Press Setup until 2 blinks
2) Enter 994 (2 blinks)   [this is the keymove command]
3) Press Vol-
4) Press Vol- again
The remote should blink twice.

1) Press Setup until 2 blinks
2) Enter 995 (2 blinks)  [Macro command]
3) Press Vol-
4) Press Setup until 2 blinks
The remote should blink twice.

9XX commands instructions
OP | Post 3 made on Tuesday January 22, 2013 at 23:53
alehman
Lurking Member
Joined:
Posts:
January 2013
3
Thanks for your help. It seems a little better. Still some delay though. Sometimes more than others.
Post 4 made on Wednesday January 23, 2013 at 00:56
3FG
Select Member
Joined:
Posts:
August 2009
1,859
To be honest, the two things I suggested should either make no difference at all or completely fix the problem.  You may want to ask TW to replace it.
OP | Post 5 made on Wednesday January 23, 2013 at 22:56
alehman
Lurking Member
Joined:
Posts:
January 2013
3
OK. I'd say no difference then. I'll see if they'll replace it. Thanks.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse