Your Universal Remote Control Center
One For All & Radio Shack Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from


Need URC-9960 Programming Code
This thread has 1 response. Displaying all posts.
Post 1 made on Monday August 22, 2011 at 19:28
Lurking Member
August 2011
Need the code so I can program my URC-9960 to control the DirecTv D12-300 receiver. Tried all the ones in the original user manual with no results.
Post 2 made on Tuesday August 23, 2011 at 00:01
Active Member
December 2002
The code for your receiver is CBL/SAT 1377 (or 01377). But your remote doesn't have that code. So you'll have to learn all the commands or get a different remote. There are about a dozen one-for-all type remotes with the code. You may want to consider the RCA RCR05B. It's not a kameleon, but it's a good cheap one-for-all remote ($15-$20) and has all the latest codes including DirecTV. It's 5 device without a JP1 cable or 8 device with one.

Jump to

Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse