I've been trying to follow the steps in an earlier thread that discussed this problem: [Link: remotecentral.com]
In post number six, the following instructions were provided:
On May 9, 2009 at 17:40, The Robman said...
Try these instructions...
1) Press DVD
2) Press and hold SETUP, 2 flashes
3) Type 994, 2 flashes
4) Press (don't hold) SETUP
5) Type 082 or 00082 (see note below)
6) Press OK/SELECT, 2 flashes
Note: I don't know if your Atlas uses 3 or 5 digit "advanced codes" so you'll need to figure out whether it accepts 082 or 00082
In a later post, it was suggested that the code associated with the ok/select key for LG TVs is 164 (or 00164). I've tried these steps, but no matter what, after step #3, the second key I press will cause the tv key to flash twice, then that's it (e.g., select then 1, select then 0, or any two number keys).
Is there something different about the specific Atlas remote I have, or is there maybe something I've missed?
My TV is an LG 42LD630, and I find I can use most basic functions of the TV with remote codes 1423 and/or 1993.
Does anyone have any suggestions?