Your Universal Remote Control Center
RemoteCentral.com
One For All & Radio Shack Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
OFA 7960 "smartcontrol" and Xtreamer media player
This thread has 2 replies. Displaying all posts.
Post 1 made on Sunday March 21, 2010 at 13:00
taykun
Lurking Member
Joined:
Posts:
March 2010
2
Is there a code avaliable for this player? Or any similar code?
I learned all commands by hand but its better to use codes because of memory limit.

Here is remote picture.
[Link: shrani.si]

And its strange that this device or manufacturer isnt included in their list of codes. Xtreamer came out in the summer of 2009, my remote came out three months ago.
Post 2 made on Sunday March 21, 2010 at 19:38
3FG
Select Member
Joined:
Posts:
August 2009
1,861
How badly do you want to find the codes? From other threads here, we know that the Xtreamer uses the NEC1 protocol, device 0. The only function number we know is Power toggle, which is 4.

Since you have a OneForAll, it is possible to custom program the remote. This assumes that the 7960 has the same capabilities as older OFA remotes. You can assign one of the many setup codes which use NEC1, device 0, and then try each of the 256 possible function numbers. This will take you about 30 minutes. Then you can assign the valid function numbers to the remote buttons.

For example, you could assign setup code Video 0770 (or 20770 if the remote uses 5 digit setup codes). Then, to test one of the 256 possible function codes:
1) Press Magic briefly
2) Enter 00000

To test the next function code use 00001 in step 2) and so forth up to 00255.

Just to make sure that the procedure works, try it first with 00180. That should be Power toggle. Of course you'll want to write down each function code that generates a response, and what the response was.

Once you have known working function codes, assign them to buttons:
1) Press Magic until 2 blinks
2) Enter 994
3) Press setup (2 blinks)
4) Enter e.g. 00180 (Power toggle, in this case)
5) Press the Power (or other) button
If successful, the remote will blink twice

If you decide to do this, please post the results of your search. It will save someone else from having to do the search again.
OP | Post 3 made on Tuesday March 23, 2010 at 12:01
taykun
Lurking Member
Joined:
Posts:
March 2010
2
thanks for answer. I got email from OFA support. They aready have codes for Xtreamer and Marusys VU+ DUO sat receiver but they need to program these codes to my remote. They asked me to send this remote to them and i sent the remote today.
I cost me only 8EUR (iam from europe), so no big deal.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse