| Post 1 made on Sunday June 14, 2009 at 16:26 |
I have a Radio shack 15-135 7 in 1 hd remote. I programmed it with code 10154 for my Sanyo DP 37649 tv. I can pull up the menu but cannot move the cursor.Any help greatly appreciated.
|
|
| Post 2 made on Tuesday June 16, 2009 at 09:20 |
mdavej Active Member |
Joined:
Posts: | December 2002
627 |
|
|
You can learn the arrow keys from the original remote. If you don't have the original remote, the EFC's (advanced codes) for the arrows are probably: UP 00038 DOWN 00042 LEFT 00250 RIGHT 00246 HERE's how to program them. The Setup button on that page is the P button on the 135.
|
|
| OP | Post 3 made on Tuesday June 16, 2009 at 13:55 |
Still didn't work. The cursor works with my Direct tv menu and moves channels also. it just wont move on the Sanyo tv menu. Any more help would be greatly appreciated. I also do not have the original remote.
|
|
| Post 4 made on Tuesday June 16, 2009 at 15:33 |
mdavej Active Member |
Joined:
Posts: | December 2002
627 |
|
|
So you tried all the above EFCs and none of them worked? To test one, just tap P then the 5 digit code. I don't know of any more codes if those didn't work.
|
|
| Post 5 made on Sunday June 21, 2009 at 12:09 |
The Robman Loyal Member |
Joined:
Posts: | August 2001
6,218 |
|
|
orrbmx, just to make sure it's bad codes vs. user error, could you outline the steps that you followed to test the EFCs that Dave posted.
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
