Your Universal Remote Control Center
RemoteCentral.com
One For All & Radio Shack Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
3-in-one Cat.No. 15-2147
This thread has 5 replies. Displaying all posts.
Post 1 made on Saturday August 25, 2007 at 03:28
Ilya
Lurking Member
Joined:
Posts:
August 2007
4
I've tried to install cod 071 for Toshiba (I know that is real cod because it's working with another remote control) according instructions [Link: support.radioshack.com]
but didn't succeed.
All another cods like 060, 154, 156 or even 4-digits donít O.K.
Any suggestions?
Thank you
Post 2 made on Saturday August 25, 2007 at 05:11
Kupakai
Long Time Member
Joined:
Posts:
September 2006
230
I don't know where you found that code or the instruction, but I'm pretty sure 15-2147 uses 4 digit codes. You should look at the manual for the remote to get the code and the programming instructions here. Codes are not universal between different universal remote makers.
Post 3 made on Saturday August 25, 2007 at 05:12
Daniel Tonks
Wrangler of Remotes
Joined:
Posts:
October 1998
28,030
The manual for your remote is here: [Link: remotecentral.com]
OP | Post 4 made on Sunday August 26, 2007 at 02:59
Ilya
Lurking Member
Joined:
Posts:
August 2007
4
Thank you guys!
I already have resolved mine problem myself using next algorithm:
1. Press TV once.
2. Press and hold P until the red LED blinks twice,
Then release.
3. Enter 9 9 1. The LED blinks twice.
4. Aim the remote at the TV and press Power. The
remote sends IR codes from its library to the
selected device, starting with the most popular
code first.
5. If the TV responds, go to step 6. If the TV does
not respond, press CH+. The remote will try the
next code. Continue until the TV responds.
NOTE: Press CH- to try the previous code.
6. To lock in the code press P once. The LED
blinks twice.
Trick was: TV initially MUST BE OFF!!!
When you pressing CH+ repeatedly, it will turn on itself on the right code.
Do not forget press P for 5sec.
Post 5 made on Sunday April 25, 2010 at 13:41
gugalde
Lurking Member
Joined:
Posts:
April 2010
1
That was awesome! it worked like a carm. I tried visiting so many other sites for instructions and this saved me the money to buy another remote. Thanks again.
Gabriel.
Post 6 made on Tuesday April 3, 2012 at 20:37
gibsonrose28
Junior Member
Joined:
Posts:
June 2011
1
On August 26, 2007 at 02:59, Ilya said...
Thank you guys!
I already have resolved mine problem myself using next algorithm:
1. Press TV once.
2. Press and hold P until the red LED blinks twice,
Then release.
3. Enter 9 9 1. The LED blinks twice.
4. Aim the remote at the TV and press Power. The
remote sends IR codes from its library to the
selected device, starting with the most popular
code first.
5. If the TV responds, go to step 6. If the TV does
not respond, press CH+. The remote will try the
next code. Continue until the TV responds.
NOTE: Press CH- to try the previous code.
6. To lock in the code press P once. The LED
blinks twice.
Trick was: TV initially MUST BE OFF!!!
When you pressing CH+ repeatedly, it will turn on itself on the right code.
Do not forget press P for 5sec.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse