I don't have the remote, but I quickly check the manual online and it's similar to other UEI remote so you should be able to use the Keymove function to input advanced codes to assign to each key. Basically, instead of moving a function of one key to another key, you are inputing the function number and assigning it to a key. This only works if you already have a device code on the remote that works with the device, but some of the functions are missing or maybe in the wrong place, like in your case.
First you need to find a list of advanced codes. Luckily, someone has listed them for your device here:
[Link: hifi-remote.com]Your remote accepts 5 digit codes and the list above is 3 digits, so add 2 zero's in front of each code. Some of those functions listed may already work, so you can leave those alone. For each of the function you wan to program in, determine which key you want to assign it to and do the following.
1. Press the device key (CBL/SAT)
2. Hold "P" for two blinks
3. Press "Other"
4. Press 9-9-4
5. Press "P" one blink
6. Enter Code (for example for play, 0-0-0-5-0)
7. Press key to assign code to (for example above, "Play" key)
Try one function that did not work previously, and see if the the above procedure works to assign the function to the key. If it works, repeat it for each of the function you want to assign to a key.
Last edited by Kupakai
on December 20, 2006 00:40.
