Your Universal Remote Control Center
RemoteCentral.com
One For All & Radio Shack Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Need Onkyo Advanced Code
This thread has 5 replies. Displaying all posts.
Post 1 made on Wednesday August 23, 2006 at 20:39
mpmclaugh33
Lurking Member
Joined:
Posts:
August 2006
2
I am looking for a couple of Onkyo advanced codes. One is a nice to have and the other is pretty important. I have spent a ridiculous amount of time scouring this forum and have managed to get pretty much every code I need for my Onkyo DR-S2.0 receiver. I am looking for the code for the "Distance" button which will allow me to set the speaker distances on the receiver. The other one is the "Acoustic Control" button. The distance one is key since it can't be done from the receiver. I don't have the original remote. Any help would be appreciated. I have played around with codes 0135, 0842 and 1298 and found most of what I need. I have a URC-8820 if that makes any difference.

Thanks.
Post 2 made on Thursday August 24, 2006 at 20:14
alfaman
Founding Member
Joined:
Posts:
November 2001
145
I don't have any direct experience with that exact Onkyo model number, but for "Distance" you might try advanced function 242 in receiver setup code 0842.
OP | Post 3 made on Thursday August 24, 2006 at 21:21
mpmclaugh33
Lurking Member
Joined:
Posts:
August 2006
2
THANK YOU, THANK YOU, THANK YOU!! I have been looking for that code for a week! You don't happen to have a list of 0842 codes do you? Below is what I have been able to find so far.

Onkyo Receiver Codes 0842
CodeDescription
245 DSP >
249 DSP <
167 Up Arrow
171 Down Arrow
164 CH Select
170 Power Off
036 Stereo
040 Surround
103 al st
107 SETUP
100 RETURN
104 Display
060 DVD
110 RE-EQ
237 sound modes
242 Distance
Post 4 made on Friday August 25, 2006 at 12:25
alfaman
Founding Member
Joined:
Posts:
November 2001
145
Glad that worked! Unfortunately, I don't have any "official" list of 842 codes, the "Distance" was just one that I had come across previously.

I do know however that some Onkyo equiment uses a combination of device codes (technically, they use an NEC format IR protocol with two different system addresses), so as you have probably already found out, your unit may also respond to some of the commands in One-for-All setup code 0135. If this is true, I would try the advanced codes listed for that code at Rob's web site (www.hifi-remote.com) if you haven't already.
Post 5 made on Tuesday November 29, 2011 at 15:34
todd palmer
Lurking Member
Joined:
Posts:
November 2011
1
do you know where I could get a list of other codes. I would like to be able to control the volume and turn my Onkyo DR-S2.0 receiver off and on. I entered the 0842 code and that shut my unit down but I pushed power again and could not get it to power back up. I am attempting to use the universal remote that came with my Comcast cable box but i do have Toshiba CT-855 universal remote that came with my TV if the Comcast remote won't work.
Post 6 made on Tuesday November 29, 2011 at 20:48
3FG
Select Member
Joined:
Posts:
August 2009
1,858
 Start with post 42 in this AVS thread.  If you have a grey OK/Select button, use the 4 digit setup codes, 5 digit if red.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse