I have a couple of questions. I recently bought a URC-4220 "One for All" remote control. First of all, none of the codes listed work for my DirecTV. I have a D10-200 receiver without DVR. Does anyone know the code? Secondly, I programmed my Apex DVD player and the buttons at the bottom of the remote don't do what they say they do. For example, the play button scans the menu up and down, while the #2 button is the play button. Is there a reason why? Thanks so much for responding!

There is no code for the D10 in that remote, the only OFA remote with a preset code is the urc-6960 6-in-1 kameleon, the code is SAT 1377. No other Kameleon models then that have the code.

Hey, i was having the same problem, but i went to www.oneforall.com and on there shows the different countries, click on your country.. and on the right hand side you'll see a little click box "need your codes and manuel click here". from there you will be redirected to another page select the remote as "not listed" pick the model combo of the remote, "tv vcr dvd combo", the brand of your device,underneathe URC4080 click on codes--the codes are similar to the 4220.

Actually I was wrong, the 4220 does have SAT code 1377 on board, and will work with the following Directv sat receiver models: D10, D11, R15, H10, H20, and HR20.

ok i have a one for all urc4220 remote and a durabrand tv tried all the codes nothing then i found one that would allow me to turn it on and off but thats about it i can do the menu thing too but its the wrong key on the remote now if any one has a code that will make the remote work so i can change the channels and the vol buttons and also so i watch the dvd player which i can do that also at this point but like i said i would love to work the other buttons as well so any one has a code so i can do that it would be great

Actually I have the URC4220,and 1377 does not work with the D10-300 Sat/wo DVR.ANy ideas on why this doesn't work since the 4220 has that code on board?

What address is the D10 set to, DTV (00001) or AV1/AV2 (00002)? SAT code 1377 is for receivers set to white remote native code 00001.

to blink back the code on the white remote:

1. dtv
2. press and hold MUTE & SELECT for two blinks
3. enter 9-9-0
4. press #1 key, it won't blink because the numeral is zero
5. press #2 key, same as a above, zero blinks
6. press #3 key, zero blinks
7, press #4 key, zero blinks
8. press #5 key, this should be 1 or 2 or 3 blinks