|
|
|
One For All & Radio Shack Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Topic: | ILO-2600 & URC6131nw This thread has 29 replies. Displaying posts 1 through 15. |
|
Post 1 made on Sunday January 22, 2006 at 22:34 |
elmer Lurking Member |
Joined: Posts: | January 2006 3 |
|
|
I have a ILO mod# ilo-2600, 26" HD LCD TV. I would like to program the remote. Ilo is listed on the package but not in the manual or on there web site. I tried to email on there web site but it wont go through. I tried to the search code on the remote but gave up after an hour. I also would like to find the code to program the dish network blue button remote.
Thanks Elmer
|
|
Post 2 made on Sunday January 22, 2006 at 22:55 |
edmund Elite Member |
Joined: Posts: | April 2002 13,838 |
|
|
Its listed as a dvd brand, tv's are TOO new to be found in any remote. If it uses a already knwn code, you'll find it if you do a codesearch, then comeback and tell us.
|
|
OP | Post 3 made on Sunday January 22, 2006 at 23:07 |
elmer Lurking Member |
Joined: Posts: | January 2006 3 |
|
|
I have tried the code search for an hour and could not get the code.
|
|
Post 4 made on Monday January 23, 2006 at 00:35 |
edmund Elite Member |
Joined: Posts: | April 2002 13,838 |
|
|
The codesearch ended well before hour stuck. Meaning there are no codes.
|
|
OP | Post 5 made on Monday January 23, 2006 at 20:34 |
elmer Lurking Member |
Joined: Posts: | January 2006 3 |
|
|
I called one for all's tech dept. The code is 1990. This remote can not take that code so I have to send it to them and they will upgrade the firmware.
Thanks for the help E
|
|
Post 6 made on Tuesday January 24, 2006 at 09:55 |
The Robman Loyal Member |
Joined: Posts: | August 2001 6,218 |
|
|
What they will actually do is discard your remote and replace it with a "service remote", which looks exactly the same as your remote but has a couple of extra bits of hardware installed. This service remote will be a JP1 compatible remote, which means that if you get yourself a JP1 cable you can load upgrades yourself in the future.
|
|
|
Post 7 made on Tuesday January 24, 2006 at 15:27 |
pep610 Lurking Member |
Joined: Posts: | January 2006 3 |
|
|
I have the ILO-2600 and am looking for the code for it to use with the Comcast Cable remote control.
Is the code 1990 mentioned above the code to use?
Thanks, Pep
|
|
Post 8 made on Tuesday January 24, 2006 at 15:31 |
edmund Elite Member |
Joined: Posts: | April 2002 13,838 |
|
|
TV Code 1990 is only a upgrade code available to UEI made remotes that are upgradeable, it isn't preset into any remote yet.
|
|
Post 9 made on Tuesday January 24, 2006 at 15:46 |
pep610 Lurking Member |
Joined: Posts: | January 2006 3 |
|
|
Do you know how I would find the code to use with the ILO and Comcast Cable remote? I've talked with Comcast and they've never heard of ILO and I've tried searching for the code with the remote to no avail.
Thanks, Pep
|
|
Post 10 made on Tuesday January 24, 2006 at 16:33 |
edmund Elite Member |
Joined: Posts: | April 2002 13,838 |
|
|
The brand of TV is TOO new, it isn't in any remote, you're out of luck. Get a universal that has a learning feature, teach the commands from the TV remote.
|
|
Post 11 made on Wednesday February 1, 2006 at 14:22 |
pep610 Lurking Member |
Joined: Posts: | January 2006 3 |
|
|
Edmund, can you tell me if the Remote below would work OK? (see above) I just have the Cable DVR box and TV. Would I be able to key in the code to work with this TV that is so new to the market? [Link: amazon.com]One For All URC 8910 Thanks, Pep
|
|
Post 12 made on Wednesday February 1, 2006 at 14:34 |
edmund Elite Member |
Joined: Posts: | April 2002 13,838 |
|
|
The 8910 has such a small learning memory, but there might be a upgrade code available from UEI, once you have the remote you can call have it loaded over the phone. Ilo owners try code TV 0171.
Last edited by edmund
on October 7, 2006 19:53.
|
|
Post 13 made on Monday January 15, 2007 at 15:07 |
Reyesj Lurking Member |
Joined: Posts: | January 2007 2 |
|
|
I purchased a ilo-2600, 26" HD LCD TV from WalMart which didnt come with a remote. So I ordered a remote which came in the mail after I ended up giving the TV back to Walmart due to negative threads on the bullitens. If interested in the remote e mail me at [email protected]
|
|
Post 14 made on Monday January 15, 2007 at 15:16 |
Reyesj Lurking Member |
Joined: Posts: | January 2007 2 |
|
|
|
Post 15 made on Friday January 26, 2007 at 14:26 |
Chrissy&Krys4Eva Lurking Member |
Joined: Posts: | January 2007 1 |
|
|
The code that works for my 32" inch iLo TV is 0171, so whoever posted that is correct. I paid $8.00 for a new remote it is One For All URC3220 that it has a code in it, that will not work, but the code 0171 worked first try. Thanks for all your help peeps!
|
Chrissy & Krys |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|