|
|
|
One For All & Radio Shack Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
K|I|S|S DP558 and URC-8210
| |
|
Topic: | K|I|S|S DP558 and URC-8210 This thread has 6 replies. Displaying all posts. |
|
Post 1 made on Monday July 25, 2005 at 04:32 |
Hi gurus, I have a K|I|S|S DP558 network enabled harddisk recorder ( http://www.kiss-technology.com ) . Now I plan to buy a OneForAll remote, but i'm still in doubt which one to buy. On the MPEG-Playcenter forum ( [Link: mpeg-playcenter.com] ) I've read that the URC-8210/8206 does not support the DP558, but that the first generation 8060 does support the DP558!! Can anybody tell me if the 8210/8206 should or will support the DP558 in the future? And if there maybe are technical limitations why the 8210/8206 cannot support the DP558? The K|I|S|S DP558 uses the protocol RC-5 device 29 (so I've been told). grtnx, Daniel
|
|
Post 2 made on Monday July 25, 2005 at 08:38 |
johnsfine IR Expert |
Joined: Posts: | September 2002 5,159 |
|
|
I don't know anything about the 8210/8206, but maybe the following info will help someone else answer you.
The setup code for RC-5 device 29 is DVD/0713, so if you were told correctly about RC-5 device 29, that it the setup code you need. It is built-in on the 8060 (and the 7562).
Most OFA remotes are upgradeable either by .wav file or by sending the remote in. For European model OFA remotes that allow .wav file upgrades you can get the .wav files over the internet. It helps to know the setup code type and number (which I gave above). For USA models that allow .wav file upgrade, you need to get the .wav file by telephone (that's a policy based restriction, not a technology based restriction).
I expect someone in this forum can tell you whether/how upgrades are available for the 8210/8206 (and whether your other source was correct that they don't have DVD/0713 built-in).
|
|
Post 3 made on Monday July 25, 2005 at 10:56 |
The code John refers to (DVD/0713) is in: URC-3440 URC-7562 B01 URC-8060 Dreambox V2 Dreambox Keyboard
according to the best information I have.
The 8210/8206 both have a built in modem, so you shouldn't have a problem downloading the file and upgrading. Jim
|
|
Post 4 made on Monday July 25, 2005 at 11:13 |
johnsfine IR Expert |
Joined: Posts: | September 2002 5,159 |
|
|
I've never logged in to the web site that I think has those downloads (.wav files you can use to install an extra setup code on your 8206), but I think the right place is: http://www.oneforall-int.com/Then select product support Then Universal remote controls Then the model you have Then Internet Download Then First Time User Then fill in a bunch of info that I think I'd need to lie about in order to get access to download upgrades for some European OFA remote that I don't actually own, so I've never gone past that point.
|
|
OP | Post 5 made on Wednesday July 27, 2005 at 01:56 |
Well thanks for your help so far! I almost sure that I am going to buy the URC-8206 this weekend. When I have the remote I will try to download the wav and see what happens...
I'll post my experiences in this thread.
grtnx, Daniel
|
|
OP | Post 6 made on Monday August 15, 2005 at 02:08 |
Well, it's already some time ago, but here I am again.
In short: IT WORKS :-)
I bought a URC-8206 instead of a 8210 (6 is enough for me and the 10 version was not available in my hometown shop). My TV and amplifier were no problem, but my SAT decoder and K|I|S|S DP 558 were not recognized by the 8206. After a phone call to the AllForOne helpdesk all problems were solved :-) They downloaded the codes via the phone and now I can control all machines with the Kameleon. It seemed that the DP558 was very new to them. They were still busy creating audio files for the support department, but now it should be no problem any more.
greetz, Daniel
|
|
Post 7 made on Monday August 22, 2005 at 06:15 |
Klax Lurking Member |
Joined: Posts: | August 2005 2 |
|
|
Dawo,
could you please get in contact with me by sending me an email to luisaguilarmateo (at) gmail.com?
I also own a KISS DP-558 and I am thinking about buying the URC-8206, but I thought it was not going to work.
I would be very grateful if you tell me the steps you took to make it work.
Thanks,
Luis
This message was edited by Klax on 09/21/05 06:40 ET.
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|