Post 1 made on Wednesday May 18, 2005 at 21:48 |
I have a new Kameleon 9960 commander.
When i try to learn, following the instructions, in step 2 (Press IR LRN Key....) appear a two bottom IR segments display one long flash and can't select a key destination for learn. The display stays equal, and can't continue (only other PROGRAMMER FUNCTION like DEV SET or SEARCH and HOME)
SETUP (3 Seconds) + IR LRN => Appear a two bottom IR segments display one long flash and can't select a key destination for learn
It happens to me the same when attempt to erase a learn key.
SETUP (3 Seconds) + IR DEL => Appear a two bottom IR segments display one long flash and can't select a key destination for learn
I do it well ?
Thank you
|
|
Post 2 made on Wednesday May 25, 2005 at 14:50 |
civichb Long Time Member |
Joined: Posts: | January 2005 28 |
|
|
Try the instructions as follows:
1) Press and hold SETUP Key 2) Press IR LRN Key 3) Press a Device key (TV, VCR, DVD, etc...) where you want to learn the command 4) Press the actual key where you want to learn the command. The display goes off and you can now press the original remote's button (do this before screen comes back on). 5) Press Home twice to exit programming.
To test, press device key selected in step 3 above, then press the key selected in step 4 to test the learned command.
If this works, repeat for other keys you want to learn.
|
Civichb |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.