I have a 'One for all' 9910 remote and suddenly the 'Guide' button no longer brings up the TV listings. The button works fine when I'm in the Tivo menu and use it to watch live TV, but when I try to click it a second time to go to the TV listings it just beeps at me. All the other button works fine.

I checked my Tivo settings to make sure it called in and update the listings and it did earlier that day.

Also the 'Guide' button on the Tivo's remote work fine.

I'm using code 1142 and also tried reprogramming the remote. No luck.

Thanks for any help,
Debbie

This message was edited by Debbie25 on 03/10/05 02:22 ET.

Try this:

1. press and hold SET
2. scroll to keymover
3. press SELECT
4. press SAT key
5. tap SET, do not hold
6. enter 1-5-0
7. press SELECT
8. press SAT key
9. press GUIDE


There are two types of peanut tivo remotes, older remotes have a GUIDE/LIVE TV key, the newer tivo remotes have separate keys for GUIDE & LIVE Tv. The tivo gets mixed up when it sees both types. The preset GUIDE command in the 9910, is the old type, where your peanut remote is the new, you need to get both remotes to emit the same command, the above steps will do that. Advanced code 150 is the separate GUIDE command. Once you map efc 150, the guide key will only bring up the guide period.

If this isn't what you want, don't use efc 150, then just hide your peanut remote.

That worked...

Thanks so much for the quick reply and great fix

Debbie

I had the same problem with my URC-9910 until I performed the 150 fix, now the guide works fine. The other problem is with the menu button not responding with the now playing 'List' function with my Hughes DVR80 combo box. Is there another quick fix or reset to perform?

Nope that is lost after the 6.2 upgrade, you can map 058, which will give the tivo central. Or use 166, which is LIST.

Thanks for your help. I used the 166 list code to sat menu key, this cuts to the chase as you can arrow back to the main menu. The supervisor at ofa tech support told me to use ops reset, which did nothing. I just wanted everyone to know that tech support does not have all the answers. Is there another code to bring the exit key alive in tivo function? either a exit code or live TV code?

Try 121 for Live TV.
Jim

121 does not work for live TV in tivo function. Is there another code? Thanks, Gary

121 does work, it just can't be mapped to the exit key on the 9910, nothing can. Use another key.

Thanks for the tip as the exit key properties were not explained clearly. Thanks again to everyone.

If you want the exit key to work, I suggest you call OFA and have code SAT1443 loaded over the phone. Code 1443 is Tivo code for remote address #1. Just happens that exit key works on this code. Other tivo addresses are #2-SAT code 1444, #3-1538, and #4- 1539.