| Post 1 made on Wednesday March 9, 2005 at 18:12 |
I just purchased a URC 6012w remote since I have managed to loose my TIVO remote. Here's my question, when I use the code provided by One For All, what buttons will function as the Thumbs up and down buttons? I had an older One For All remote but I couldn't figure out which buttons would serve as the thumbs. Thanks for any help you can provide.
|
|
| Post 2 made on Wednesday March 9, 2005 at 18:18 |
edmund Elite Member |
Joined:
Posts: | April 2002
13,839 |
|
|
None, and you can't add them using advanced codes either. The tivo code in the 6012 doesn't accept advanced codes. I suggest you get the URC-6131 instead.
|
|
| Post 3 made on Wednesday March 9, 2005 at 19:42 |
The Robman Loyal Member |
Joined:
Posts: | August 2001
6,218 |
|
|
Or, you could send the remote back to OFA ans ask them to re-add the code so that you can use advanced codes.
|
|
|
| Post 4 made on Wednesday March 9, 2005 at 20:28 |
edmund Elite Member |
Joined:
Posts: | April 2002
13,839 |
|
|
If you do have it upgraded, don't just ask for the codes VCR 0618 or SAT1142. These are for address "0", ask for setup codes for alternate remote addresses. So you can more then one tivo in the same room. the codes to ask for are: address #1- VCR 0740 or SAT 1443, #2- VCR 0745 or SAT 1444. All these setup codes accept the same advanced codes.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
