I need the advanced code to switch my input on my jvc receiver to tv/dbs. Any help would be welcome.

I think the code you need is 203, the following are all of the codes that I found to work:

JVC RX-888VBK Receiver advanced codes on Cinima 7 remote
Device code: 0074

006 Power Off
008 Power On
010 Power On/Off toggle
020 Phono input select
021 Sea mode toggle
024 CD input select
026 Tape input select
038 Rear Left speaker +
042 Rear Left speaker -
053 FM
054 Ballance -
057 AM
058 Ballance +
059 AM/FM toggle
077 Right Rear speaker +
081 Right Rear speaker -
085 FM preset 8
087 FM preset 10
089 FM preset 9
090 ?
103 One Touch operation toggle
110 DVD multi input select
114 Surround test On/Off toggle
119 Video input select
121 VCR 1 input select
122 Power On/Off toggle
132 Toggle between DBS and DBS Digital
136 Loudness On/Off toggle
149 SEA mode usermode On/Off toggle
170 VCR 2 input select
171 DVD Digital input select
184 Surround On/Off toggle
187 Sleep
203 DBS
210 Center tone (cycle)
212 FM preset 4
214 FM preset 6
215 FM preset 2
216 FM preset 5
217 FM preset 1
218 FM preset 7
219 FM preset 3
229 Surround mode (cycle)
233 Surround mode (cycle)
235 AM/FM toggle
237 Center speaker +
241 Center speaker -
249 Mute
245 Channel down
246 Volume up
247 Off
249 Channel up
250 Volume down

thanks alot. Now I can quit carring two remotes around. Life is good.

Rob,

I have the jvc rx 888 receiver. I have it assigned to Aux1. The code I am using is 0074. I would like to be able to access the on screen menu by using the menue key and from there use the arrow keys to move around in the on screen programming. Then exit out. Oh by the way I have the rs1994 remote.

Mike,
Can you do this with the original remote? If not, then it might not be possible. I don't have advanced codes listed for the UP, DOWN or MENU buttons, but if you have these buttons on your original remote, you can learn the functions from that remote into the 15-1994.

Here's the advanced codes that I have
[Link: hifi-remote.com]

Rob.
http://www.hifi-remote.com

Rob,
Yes the original remote has a menue button and then you use the arrow keys and select key, to control the receiver through the on screen programming. I have used some of the advanced codes and they work, but I can't get it to learn the menue,arrow,select or exit keys. What do you think?

Mike