I'm in need of more advanced codes for my Denon AVR-2800. Similar codes would be for any Denon receiver (1800, 2700, 3200, 3300, 5700, etc)

Need codes specifically for:

DVD
SYSTEM SETUP
CH SELECT
ON SCREEN
STATUS
SPEAKER
DOLBY/DTS SURROUND
DIRECT
5CH STEREO
STEREO
INPUT MODE
ANALOG
EXT IN

I could not find any of these codes on Starbase 314 but am told they do exist. I figured I'd see if someone documented them before I go searching for them all.

Evan,

If you find them please let know since I've got the AVR-2700 and I'd like to know what they are as well. I've got an email in to UEIC asking them specifically about this receiver and if I hear back I'll let the group know. Are you using device code 0160 for the receiver? I don't think there are any discrete codes for the individual surround modes on the lower model Denon's. I know the 5700 has them but I don't believe there are any for the lower models. This is what I recall from some conversations regarding the Pronto at the Home Theater Forum.

I am using the 0160 code on the AUX device of my Cinema 7. I'd find it odd that there are discrete codes on the 5700 for individual surround modes but not on the lower models as all of the models considering the 2800/3300/5700 use the same remote, but who knows. I might go manually code searching through everything to see what I come up with.

Evan,

Check out this thread...

[Link: remotecentral.com]

HTH

I have the Denon AVR1400 receiver and I plan to go through the advanced codes manually tonight.
I will post here my results and complete advanced codes list for the Denon remote control as soon as I can.

I personally find it ok to search for advanced codes manually. Going through the 255 possible codes only takes about half an hour. This sometimes requires patience cause you might come across codes that seem to do nothing unless the device is already in a special mode, but it is worth the attempt.

It's also good fun : yesterday I was manually testing all codes for my Toshiba rear-projection TV and I came across very weird on-screen menus I had never seen before, which completely changed colors in the picture like swapping Red, green and blue tubes (probably colorimetry settings for maintenance technicians)...I don't know to what extent this kind of manual exploration could be harmful to the equipment although I don't really think one could do much damage just by using the remote controller...

Any opinion or experience (good or bad) on the subject ?

Waldok

Denon AVR-3300 (manuf. code 0160) advanced codes:

You can add multiples of 256 to these and they will still work.

020 Phono
022 Power on/off
023 Tuner
027 CD
058 Mute on/off
088 Tape Monitor
119 Speaker
120 Test Tone
150 TV/DBS
151 VCR1
152 VDP
153 VCR2
213 Onscreen display
217 Status
218 Video select
219 Analog input
244 DVD
248 Power off (discrete)
249 DSP simulation
250 Channel select enter
251 Dolby/DTS

I added these to the FAQ.

[Link: ampersand.hypermart.net]

Here are a bunch more advanced codes for the Denon AVR-2800 which should
also work for the 3300. Basically you need to set your receiver to 0160
for the standard codes but you need to use 0004 for some of the advanced
codes. Just set your receiver to 0004, set the advanced codes you want,
then switch back to 0160. Worked great for me.

Bill



#0160
020 Phono
022 Power on/off
023 Tuner
027 CD
054 Master Vol+
055 Master Vol -
058 Mute on/off
088 MD/Tape
119 Speaker
120 T. Tone
150 TV/DBS
151 VCR1
152 VDP
153 VCR2
213 On Screen
215 Cursor Right
217 Status
218 Video select
219 Analog
244 DVD
248 Power off (discrete)
249 DSP simulation
250 Enter-Channel select
251 Dolby/DTS Surround

#0004
039 Ext. In
041 Input Mode
101 Enter-CH Select
103 DVD
107 Phono
106 5 CH Stereo
189 Cursor Left
199 Stereo
201 Direct
213 Dimmer
228 Cursor Up
230 Surround Parameter
231 Output
235 Cursor Down

I have found that some of the codes above do not work on my receiver.

If anyone has a complete set of codes specific to the AVR-2800 or codes not listed above, please post them here.

Meanwhile, I will be going through all possible codes in 0160 and 0004 to see what is there, but I can only do so many at one sitting. I will post whatever I find when I am finished.

By the way, I am using the RS 15-1994 remote, but posting here since htere is no forum set up for the 15-1994.

How about it. Would the moderator set up a forum for the 15-1994?

Here is a complete list of codes for the Denon AVR-2800. These codes are for controlling the receiver and amplifier features, so no codes are listed for things like the "TV/VCR" A/B button (which is used for controlling the video source of a TV, not the AVR-2800).

I hope the format of the charts stick... Have Fun!!!

=====================================

     Denon RC-865       Device Button
     Remote Button       Code   Code
======================= ====== ======
Power Off                0160   248
Power On                 0160   246
1 - DVD                  0160   244
2 - VDP                  0160   152
3 - Tuner                0160   023
4 - TV/DBS               0160   150
6 - Phono                0160   020
7 - VCR-1                0160   151
8 - CD                   0160   027
9 - MD/TAPE              0160   088
+10 - VCR-2/V-AUX        0160   153
SHIFT                    0004   151
CHANNEL  "+"             0004   089
CHANNEL   "-"            0004   087
SPEAKER                  0160   119
DOLBY/DTS SURROUND       0160   251
DIRECT                   0004   201
DSP SIMULATION           0160   249
5 CH STEREO              0004   106
STEREO                   0004   199
INPUT MODE               0004   041
ANALOG                   0160   219
EXT. IN                  0004   039
MASTER VOL - UP          0160   054
MASTER VOL - DOWN        0160   056
MUTING                   0160   058
TUNING - DOWN            0004   216
TUNING - UP              0004   214
TUNING - BAND            0004   085
TUNING - MODE            0004   218
TUNING - MEMORY          0004   155
SYSTEM SETUP             0004   234
SURROUND PARAMETER       0004   230
STATUS                   0160   217
ON SCREEN                0160   213
CURSOR - UP              0004   228
CURSOR - DOWN            0004   235
CURSOR - LEFT            0004   189
CURSOR - RIGHT           0160   215
CH-SELECT/ENTER          0160   250
T. TONE                  0160   120
OUTPUT                   0004   023
=====================================

Advanced Codes w/ no                    
 button on the Denon                     Device Button
 RC-865 Remote                            Code   Code
======================                   ====== ======
Power - Toggle On/Off                     0160   022
Video - Select Simulcast with Audio
 Sound Source                             0160   218
CH-SELECT/ENTER -
 This one does not work with the System
 Setup menus"                             0004   101
Tune - Current Preset Channel - Slot "1"  0004   022
Tune - Current Preset Channel - Slot "2"  0004   024
Tune - Current Preset Channel - Slot "3"  0004   020
Tune - Current Preset Channel - Slot "4"  0004   027
Tune - Current Preset Channel - Slot "5"  0004   023
Tune - Current Preset Channel - Slot "6"  0004   025
Tune - Current Preset Channel - Slot "7"  0004   021
Tune - Current Preset Channel - Slot "8"  0004   154
Tune - Current Preset Slot - Channel "A"  0004   166
Tune - Current Preset Slot - Channel "B"  0004   168
Tune - Current Preset Slot - Channel "C"  0004   164
Tune - Current Preset Slot - Channel "D"  0004   171
Tune - Current Preset Slot - Channel "E"  0004   167
Video Source (Scroll to select)           0004   103
Audio Source (Scroll to select)           0004   107
Panel Light Dimmer                        0004   213