Your Universal Remote Control Center
RemoteCentral.com
One For All & Radio Shack Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 2 of 2
Topic:
ADCOM GTP 500 codes?
This thread has 26 replies. Displaying posts 16 through 27.
Post 16 made on Tuesday May 9, 2006 at 13:30
johnsfine
IR Expert
Joined:
Posts:
September 2002
5,159
You would get better answers to JP-1 questions in the JP1 forums.

Almost any JP1 remote can be upgraded with that txt file to support all the functions of the GTP-500 original remote.

The best source for a JP1 remote and cable is Rob:
[Link: hifi-remote.com]

Usually he is willing to preload an upgrade if you request that at the time you order the remote, so you could get remote and JP1 cable and be able to use the remote for your GTP-500 even before you learn to customize it by JP1. You could even skip buying the cable if Rob loads the upgrade, but I wouldn't advise it. Being able to customize that upgrade (or others) later is well worth the cost of the cable.

To use that .txt file you need EITHER the KM spreadsheet plus Microsoft Excel OR the RM program plus Sun Java (Sun Java is a free download). After reading the txt file with one of those programs, you need IR.exe to integrate the upgrade with an eeprom image for your remote and to transfer it to the remote.

All the software except Excel is available for free download.
Post 17 made on Tuesday May 9, 2006 at 16:06
The Robman
Loyal Member
Joined:
Posts:
August 2001
6,214
From the cross-post in the Remotes forum:

On May 9, 2006 at 11:15, The Robman said...
What problems did you have with my site?

It's unlikely that a universal remote will have
the Adcom codes pre-loaded as the codes are not
in most OFA remotes. If you don't want to bother
learning how to use JP1 just to load this one
code, I could pre-load the code into a remote
for you.


You can chose from any of the JP1 remotes listed
in my "for sale" thread.
[Link: hifi-remote.com]

If you don't know how to order from me, all you
have to do is send me the money via Paypal and
mention in the notes section of the transaction
which remote you are ordering and which code you
want loaded.

Also, just FYI, the GTP500 and GTP500II use different
codes.
Rob.
[Link: hifi-remote.com]
Post 18 made on Friday October 27, 2006 at 15:45
jimdog8467
Lurking Member
Joined:
Posts:
October 2006
2
On July 11, 2003 at 13:34, The Robman said...
Hey venik,
If you would like a remote with all the Adcom codes pre-loaded,
let me know.

Rob
http://www.hifi-remote.com
JPC
Post 19 made on Friday October 27, 2006 at 15:49
jimdog8467
Lurking Member
Joined:
Posts:
October 2006
2
Rob, I am new to this website but note you seem to be the man who has purhaps the answer to Adcom remote failures. My Adcom GTP 500II remote is dead and I am looking for quick fix. Can I purchase one from you or somone with everything loaded so its usuable upon delivery? Cost?

JPC
JPC
Post 20 made on Tuesday July 15, 2014 at 18:46
aNish-Anobii
Junior Member
Joined:
Posts:
July 2014
4
I am looking for a replacement remote control for: Adcom GTP 500 Pre-Amp/Tuner Stereo
Adcom GTP 500 codes needed
Post 21 made on Tuesday July 15, 2014 at 22:30
3FG
Select Member
Joined:
Posts:
August 2009
1,847
Adcom sells a solution.  If that is too expensive, get an Atlas 1056B01 (not a B03) from eBay and we'll tell you how to enter in 5 digit codes for each function.  A Vizio VUR8 (eBay)  will also work.  Make sure that you haven't confused the GTYP-500 and the GTP-500II.  They use different codes, but the two remotes recommended here will send either IR signal.
 
Post 22 made on Friday July 18, 2014 at 11:16
mdavej
Active Member
Joined:
Posts:
December 2002
547
That Adcom remote appears to be an ordinary URC WR7, $25 most places.
Post 23 made on Friday July 18, 2014 at 17:11
edmund
Elite Member
Joined:
Posts:
April 2002
13,442
On July 18, 2014 at 11:16, mdavej said...
That Adcom remote appears to be an ordinary URC WR7, $25 most places.

But, probably preloaded with the commands from the Adcom. Which $25 WR7 doesn't have.
Post 24 made on Thursday July 24, 2014 at 20:06
aNish-Anobii
Junior Member
Joined:
Posts:
July 2014
4
I bought a used URC WR7 from ebay, and used their ADCOM codes from the instructions. The Pre-Amp will power on and the volume works. Thank you for your suggestions.
Adcom GTP 500 codes needed
Post 25 made on Thursday July 24, 2014 at 20:09
aNish-Anobii
Junior Member
Joined:
Posts:
July 2014
4
Thanks for the suggestion - it works.
Adcom GTP 500 codes needed
Post 26 made on Thursday July 24, 2014 at 20:24
aNish-Anobii
Junior Member
Joined:
Posts:
July 2014
4
Yes, $50 is steep to pay for the codes that are already listed in the universal remote instructions. Thanks for your assistance. I bought a used URC WR7 from ebay. The code that powers on and off / controls volume is: 225 under Audio three digit set-up instructions.
Adcom GTP 500 codes needed
Post 27 made on Monday August 25, 2014 at 22:32
4sound
Junior Member
Joined:
Posts:
August 2014
1
ROB - I found youand RC on Google, joined RC and am trying to get a remote that will operate my ADCOM GTP 500....Wife lost it 2 Christmases ago after I hookedit up with her dad's antique $100 phonograph.
Jim L (4sound)
Page 2 of 2


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse