On 06/08/03 13:29, dOuGiE2K3 said...
Do you have codes for the red, green, yellow and
blue buttons for the Grundig 1500 Digital TV box,
[Link: remotecentral.com]but when I make the output file, because it is
a part of a complete system CCf file, i get a
LOT of stuff outputted into the file and i dont
know where the commands for the Digital receiver
are.
First, that needs the version of ccf2efc.exe and associated DecodeIR.dll from the Yahoo JP1 group. The older version of ccf2efc here in RC won't do Grundig.
Next, it helps to know that the Grundig protocol decodes as "Blaupunkt{body}" so all and only decodes that say that go with this device. Without that fact, you need to look at the "DEVICE" lines and guess. That CCF has:
DEVICE(0003424C) "DVB"
I'm not sure I would have guessed that meant the Grundig digital tv receiver.
Next, you need to guess what the function names mean. If I'm guessing correctly, here are your answers from that file:
"R" (Blaupunkt{body}):0:122 EFC=055
"G" (Blaupunkt{body}):0:126 EFC=183
"Y" (Blaupunkt{body}):0:123 EFC=053
"B" (Blaupunkt{body}):0:110 EFC=215
Finally, SAT/0140 isn't one this (primarily USA) group looks at much, so I'm not certain it uses the same EFC rules as my decoder. Try those EFCs and if they fail, I double check that detail and get better ones.