| Post 1 made on Wednesday January 8, 2003 at 19:41 |
Lawyerman Lurking Member |
Joined:
Posts: | December 2002
4 |
|
|
Can someone tell me how to program advanced codes with the new URC-8910? I have a URC-7800 (Cinema7) and was able to program advanced codes using 994 , but that doesn't work with the new remote.
Any help would be appreciated. Thanks.
|
|
| OP | Post 2 made on Wednesday January 8, 2003 at 19:51 |
Lawyerman Lurking Member |
Joined:
Posts: | December 2002
4 |
|
|
Nevermind, I found the answer in another thread. For the record, this is how you do it:
1. Hold set key
2. Go to keymover, press select
3. Screen says"from mode",select a mode
4. Screen says"from key", hit set(screen changes to synt)
5. Key in advanced code, hit select
6. Screen says "to mode", select a mode
7. Screen says "to key", select a key
8. Screen says "success", exit setup
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
