Post 1 made on Sunday December 29, 2002 at 21:33 |
ajbrutico Lurking Member |
Joined: Posts: | December 2002 2 |
|
|
When i create a macro, and map it to the M1 button, with the following commands:
Change to Reciever Power Button to reciever Input 1 (Cable TV) Change to TV Power Button to TV Select Video 3 Change to Digital Cable Box Power to Digital Cable Box
This sequence works great when i power up from a completely turned off system.
If everything is on and I try to reverse everything by pressing the macro button again. The Sony Reciever powers off, and then back on in the cycle. Therefore all equipment is off except the reciever which went off and back onn again.
Anyone having trouble like this? Anyhone know what could be causing it? Reciever is Sony STR-DE685 on AV1 to be compatable with all in one remotes.
A.J.
|
|
Post 2 made on Sunday December 29, 2002 at 21:39 |
Alfer2002 Long Time Member |
Joined: Posts: | December 2002 18 |
|
|
I had a similar problem some time ago with another remote and the Sony 925...It seems that anytime you tell the macro to select any "input" on the receiver,the receiver reads that as a need to turn on again.
You're going to have to do like I did with my Kameleon and Pioneer 811...M1 is strictly "POWER" on (off) to all components. Then I told M2 to switch receiver to my VCR so I can watch locals..then M3 I tell it to switch receiver to Directv, and finally M4 I tell receiver to switch to DVD..It covers all the bases for me and I just use M1 for powering on and off...very easy and my wife agrees..:)
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.