I'm going to buy One For All URC-8910 or URC-9910.
Can anybody confirm that this remote will control Pioneer DV-444 DVD-player?

As far as I know, this Pioneer DVD-player is supplied with VXX2702 remote. The same remote is included with DV-333 and DV-535, so please report if you have them under control.
Many thanks!

The DVD/0571 code should work your player, however, the people who program the One For All remotes have changed the Pioneer code in recent remotes, so that it no longer accepts advanced codes. What this means to you is, if you decide to program in any of the missing functions, you will have to use learning rather than advanced codes.

Rob
http://www.hifi-remote.com

I have a Pioneer DV-434. And a mx-1000 w/ an urc-9910 accessory remote. The 9910 uses the 0571 device code so you can use the discrete codes for on,031, and off,035. Or any of the other codes for the 0571 device.

To make the ofa send the signal so the mx-1000 can learn it make sure you are using the 0571 in the ofa and then push (but do not hold) the set button then the three numbers. You should notice the little red light not lighting up until the third number . ..