Help - I ve got an old Cyrus tuner which can only be controlled from the remote - The manufacturer has supplied me with the RC5 codes - is there any way of getting the URC 7450 to control this beastie??

Many thanks

If you post what the RC-5 device code(s) are, I can tell you what codes use these device codes.

Rob.

Thanks

Tha RC5 codes are

Code RC5 Tuner (17) Mission Cyrus tuner
0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
10 1 Digit/2 Digit
11
12 Standby
13 Mute/Demute Review
14 Personal preference
15 Display
16 Volume +
17 Volume - Store
18 Brightness +
19 Brightness -
20 Colour Sat +
21 Colour Sat -
22 Bass +
23 Bass -
24 Treble +
25 Treble -
26 Balance Right
27 Balance Left
28
29 FM/AM
30 Search +
31 Search - Manual
32 Preset + Volume +
33 Preset - Volume -
34
35
36
37 Mono/Stereo
38
39
40
41 Store execute Store
42
43 Scan Forward
44
45 FM
46 MW
47 LW
48 Pause
49 Erase (Correct/clear entry)
50 Rewind/Fast run reverse 51 Go to
52 Wind/Fast run forward Seek>
53 Play
54 Stop
55 Recording
56 Connect (External 1)
57 Disconnect (External 2)
58 Clear all memories
59
60
61 System standby
62
63 System select Standby

Try RCVR/0189, that uses RC-5 device 17.

Here are those functions converted into advanced codes, in case the buttons are not mapped out properly

EFCFunctions
173num 0
205num 1
109num 2
141num 3
045num 4
077num 5
237num 6
013num 7
172num 8
204num 9
1081 Digit/2 Digit
044Standby
076Mute/Demute Review
236Personal preference
012Display
175Volume +
207Volume - Store
111Brightness +
143Brightness -
047Colour Sat +
079Colour Sat -
239Bass +
015Bass -
174Treble +
206Treble -
110Balance Right
142Balance Left
078FM/AM
238Search +
014Search - Manual
177Preset + Volume +
209Preset - Volume -
081Mono/Stereo
208Store execute Store
144Scan Forward
080FM
240MW
016LW
179Pause
211Erase (Correct/clear entry)
115Rewind/Fast run reverse 51 Go to
051Wind/Fast run forward Seek>
083Play
243Stop
019Recording
178Connect (External 1)
210Disconnect (External 2)
114Clear all memories
082System standby
018System select Standby

Rob.
http://www.hifi-remote.com

Thanks for the info - when you say use RCVR 0189, does that mean that I use the SAT button, or will I need to buy a 6 way remote (like the URC 7562) which has hi-fi functions??

When I say "receiver", I mean "stereo receiver", aka "tuner" or "hifi", nothing to do with Satellites.

I'm not personally familiar with the URC-7450, so I don't know whether it has an audio device button, or whether it has the audio/0189 code.

Rob.

Hi all

I have similar problem maybe you can help me out ?
I am more than beginner here but I am learning.
My problem:
I have a Cyrus tuner which works only with remote and the latter is lost!
I bought a One for all URC-1210 (because I know it works with this model).
I have all RC-5 code for the tuner but I don't understand how to program it whit the remote.
I do understand that I have to press "magic/setup" button, it blinks twice and then...
But I missing the big picture...
I think I have to recreate one by one all functions and assign it to a button on the remote (because my tuner is not listed and pre-recorded on the one known by the URC-1210), correct ?
But how to start with ?
e.g. I want to assign the volume-up (code rc-5 = 16) to the volume touch of my RC.

Thanks a lot

Laurent

The OFA urc-1210 is tv only one device remote, ususlly preset to certain brand but I see they sell one where can chose different tv brands. But there are no audio codes in the remote.