Post 1 made on Monday December 27, 1999 at 13:17 |
Tim S. Historic Forum Post |
|
|
Does the Home Producer 8 support Advanced Function Codes like other OFA remotes?
I just got one of these for Christmas. Very nice but the preprogrammed buttons support very little of the functions on my Pioneer VSX-D2S receiver. It would be nice to put in Advanced Function Codes for some critical features (like input selection).
If it does support them, how do I access them? The manual doesn't mention anything.
|
|
OP | Post 2 made on Monday December 27, 1999 at 18:15 |
Robert Historic Forum Post |
|
|
Time What code did you use for the basic functions for your receiver. And Yes the Home producer 8 does support advanced codes they are just input differently than the other OFA remotes.
Robert
|
|
OP | Post 3 made on Wednesday December 29, 1999 at 17:04 |
Tim S. Historic Forum Post |
|
|
OK, how do I enter advanced function codes on a Home Producer 8? I have no "magic" key and the instruction manual doesn't mention anything about it.
|
|
OP | Post 4 made on Wednesday December 29, 1999 at 17:55 |
Robert Historic Forum Post |
|
|
Tim
Here is how
KEY MAGIC
This feature allows you to duplicate functions from your original remote by programming the advancedcode for that function onto a key on the remote. (You can order the Advanced Function Codes for your equipment on this site.) This feature will NOT work on keys that already have more than one function on them that are accessed using the SHIFT key
1.Find the 3-digit advanced code for the original function of your remote. 2.HOLD DOWN the MAGIC button until the screen reads TIMED SEQ. 3.TAP the MENU DOWN (-) button twice, the screen will read CONFIGURE. 4.TAP the SELECT button, the screen will read THEATR SEL. 5.TAP the MENU DOWN (-) button five times, the screen will read KEY MOVER. 6.TAP the SELECT button, the screen will read FROM. 7.TAP the DEVICE button where you wish to take the function FROM. 8.TAP the MAGIC button and release 9.ENTER the 3-digit Advanced Code for the function on your original remote. 10.TAP the DEVICE button where you want to move TO. 11.TAP the button you want to move the function TO, the screen will go back to the main display.
Now the button you selected will operate the function you desired.
note : replace the magic key with the setup key.
Robert
|
|
OP | Post 5 made on Wednesday December 29, 1999 at 21:02 |
can any1 help me with dss rca 4th gen. advenced codes
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.