Can Anyone tell me how to program the OFA 9800 with the Advanced function codes. I have the advanced codes from the Starbase website. But the 9800 does not program like the cinema 7. Any help would be greatly appreciated !!!

Thanks
Robert
[email protected]

Check out "http://www.tiac.net/users/wasser/OFA/" for information on this. You will also get specific instructions from OFA when you request codes for a specifice device.

Arthur Bye

Athur,
Thanks for the point in the right direction! This is what I found for those looking on how to program the advanced functions for the OFA 8090/8080 9800 remotes.



KEY MAGIC

This feature allows you to duplicate functions from your original remote by programming the advanced code
for that function onto a key on the remote. (You can order the Advanced Function Codes for your equipment
on this site.) This feature will NOT work on keys that already have more than one function on them that are
accessed using the SHIFT key

1.Find the 3-digit advanced code for the original function of your remote.
2.HOLD DOWN the MAGIC button until the screen reads TIMED SEQ.
3.TAP the MENU DOWN (-) button twice, the screen will read CONFIGURE.
4.TAP the SELECT button, the screen will read THEATR SEL.
5.TAP the MENU DOWN (-) button five times, the screen will read KEY MOVER.
6.TAP the SELECT button, the screen will read FROM.
7.TAP the DEVICE button where you wish to take the function FROM.
8.TAP the MAGIC button and release
9.ENTER the 3-digit Advanced Code for the function on your original remote.
10.TAP the DEVICE button where you want to move TO.
11.TAP the button you want to move the function TO, the screen will go back to the main display.

Now the button you selected will operate the function you desired.

note : replace the magic key with the setup key.

Arthur,
I've been waiting 4 days now for OFA to email me some specific advanced codes. I even followed up again regarding this issue this past Friday and still nothing. So far their support has been pretty bad. The first tech I ever spoke with gave me totally wrong information on a number of questions.

Guys, forget support from OFA. I gave up after about 10 calls and about a dozen emails. I've had a Cinema 7 for over a year and not once did OFA every respond to any inquiries. My suggestion is either search the web for your codes or try and find codes yourself (very time consuming but does work) I've been able to find codes for functions that are not even on the original remote ie. high speed rewind on a VCR, service menu on Pre/pro etc..