| Post 1 made on Saturday March 10, 2001 at 05:03 |
I have a Denon avr 2801 receiver. Programed the remote with the code and it was fine for the basic functions. Used Hifi-remote.com for the learning codes and they went in fine for all the other functions,(dsp modes,on screen programing,surrond parameters etc.)Toshiba 1600 DVD was next. The 15-1994 took the device code fine for basic functions. Used the "learn"codes to punch in the rest which were also going in.Was about 6 functions away from having the entire DVD remote in the 15-1994 and it stoped learning. Tried to get it to learn any function in any device mode, it would not. Used AUX 1 for receiver AUX 2 for DVD. Loved remote up to this point! Any help would be greatly appreciated.
|
|
| OP | Post 2 made on Saturday March 10, 2001 at 15:35 |
Donald Miller Historic Forum Post |
|
|
Sure sounds like the memory is full. There is only room for about 18-24 learned codes in the 15-1994. If you can find the advanced codes for some of the functions, you can enter them that way. There is room for about 45 advanced codes (in a separate area from the learned codes).
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
