Post 1 made on Friday February 23, 2001 at 13:51 |
John Smith Historic Forum Post |
|
|
I have an Echostar Dishplayer and the 15-1994 remote does not have a code for it. I have use the learn feature to learn all the dishplayer remote codes to the 15-1994. I currently have Power configured to 1S. Can I have the actual power button on the 15-1994 learn the power button from the dishplayer. When I try to have it learn it doesn't flash rapidly when I click the power button. What buttons are fixed and can't learn anything?
Thanks
|
|
OP | Post 2 made on Friday February 23, 2001 at 16:31 |
The Robman Historic Forum Post |
|
|
|
OP | Post 3 made on Friday February 23, 2001 at 17:47 |
John Smith Historic Forum Post |
|
|
I have been able to learn all the other keys, but power must be a non-learnable key. Is this true?
|
|
OP | Post 4 made on Saturday February 24, 2001 at 12:05 |
The Robman Historic Forum Post |
|
|
Soounds like you have used up all the memory then, have you learned about 24 buttons? If so, it's full.
Rob.
|
|
OP | Post 5 made on Saturday February 24, 2001 at 13:31 |
Had same problem with my reciver that was not supported so I just learned the "power" function to the stop button in the VCR function keys, you could put it on any unused key.
|
|
OP | Post 6 made on Sunday February 25, 2001 at 22:58 |
John Smith Historic Forum Post |
|
|
I got it to work on the power button. I think I was using too much memory on other buttons, so I cleared a few and it worked. Thanks
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.