Post 1 made on Friday January 12, 2001 at 08:18 |
X-10 and One for All Cinema 7. In the owners manual for the Cinema 7, there is a Device Code for X-10 but no instructions, any help on how to get the Cinema 7 to controll the X-10 components. Thanks...Larry
|
|
OP | Post 2 made on Friday January 12, 2001 at 09:50 |
The Robman Historic Forum Post |
|
|
First off you need an X10-toIR converter,such as the 4040 or the IR543, then program device code 0167 to either the CD button or to a button that has been remapped to be a CD button.
Then use these buttons: POWER = "Lights On" MUTE = "All Off" VOL+ = "Brighten" VOL- = "Dim" CH+ = "On" CH- = "Off" 1 thru 9 = Devices 1 thru 9 0 = device 10 rew = device 11 play = device 12 ffwd = device 13 rec = device 14 stop = device 15 pause = device 16
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.