I just installed a S70 for a customer that has previous used URCs for years without any issues. The reason I switched them was they have about a dozen Vizia RF+ switches and didn't like the leviton remote for controling them. So I researched and decided to try the S70 even though my experience has been mostly with URC products. Well I have admit I like the Nevo Studio pro software much better then the URC software . However, I am having troubles with the S70 losing the connection to the Nevo connect. They are only about 10 feet apart but the nevo connect is in a wood cabinet. I have reset the nevo connect and the S70 and ensured they have the latest firmware. Currently I only have two nodes loaded the S70 and the Nevo connect. I haven't added the vizia rf+ nodes yet. I have been testing the s70 and nevo connect and keep getting errors every so often I get the red triange at the top of the remote and a screen to trouble shoot the nevo connect. It doesn't happen consistently but does happen alot say every 5 commands or so. No pattern. It keeps asking if I want to add the node. I add and it shows successful but then after a few commands it errors out to the trouble screen and askes if I want to add it again. In addition sometimes there is a red triangle at the top and it no longer functions and other times there is a red triangle yet it still funtions fine. Has anyone else experienced this? I have contacted the distributer but have not heard back from them on this issue so I was wondering if anyone else has noticed this behavior. Lastly I am want to integrate the S70 into my customers vizia RF+ network and am not sure exactly how to do this. Their network is working flawlessly using the existing Leviton remote and is also integrated with a VRZCOP serial interface so I am a little worried that converting everything over to the S70 will reduce their reliability since I can seem to get a stable config even with the S70 and the nevo connect for the A/V equipment.

Hi,

Try these:
[Link: remotecentral.com]

[Link: remotecentral.com]

[Link: remotecentral.com]

[Link: remotecentral.com]


Please post back if none of these help or even if they do.

D

Well this appears to have helped. I removed the antenna and reinstalled it and made sure it was snug and now all the A/V equipment seems to react fine and the communication errors seemed to have went away between the S70 and the the NC-50. Now just converting the Leviton Vizia network over from the Leviton remote to the Nevo. So far It still seems weak it I get the red triangle when trying to control a dimmer so I may need more nodes. I have finished setting up the Vizia network and while the Nevo can control all of them ok it does not seem to be able to get status unless I am very close to the nodes. The previous network setup with the Leviton remote never had any issues getting status so not sure what is going on.