 |
 |
|
|
UEI Nevo Remote Controls Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
|
Customer upload to s70 from "my nevo" help
| |
|
| Topic: | Customer upload to s70 from "my nevo" help This thread has 6 replies. Displaying all posts. |
|
| Post 1 made on Friday June 5, 2009 at 19:01 |
Hey Ive searched the forum and found nothing. What does the customer need to do to upload to their s70 from a config I have uploaded to the Nevo server?
any help is appreciated
John
|
Ninth Wave Audio Video Design 540 Cumberland St Memphis, TN 38112 www.9thwave.com |
|
| Post 2 made on Saturday June 6, 2009 at 14:05 |
brodyboy Long Time Member |
Joined:
Posts: | April 2008
375 |
|
|
It isn't exactly clear what you're trying to do. Load a configuration onto your S70? I don't understand what you mean by "a config [you] have uploaded to the Nevo server?"
|
|
| OP | Post 3 made on Saturday June 6, 2009 at 15:56 |
Under "File" on Nevo Studio there is an "upload to MyNevo" choice. This allows you to upload and save a configuration for an s70 on a Nevo server and your customer can download it to their remote through WiFi. Thus saving a trip to the customer's house. I know that the customer has to take the battery cover off and turn the unit off, then back on while holding down some buttons, but I just can't remember which ones. Thanks
|
Ninth Wave Audio Video Design 540 Cumberland St Memphis, TN 38112 www.9thwave.com |
|
| Post 4 made on Saturday June 6, 2009 at 22:55 |
Duct Tape Loyal Member |
Joined:
Posts: | November 2008
5,298 |
|
|
page 140 of the design guide:
Using NevoXpress Wireless Download via www.mynevo.com
NevoXpress Wireless Download is a method for allowing installers to change a configuration and easily transfer it to the client’s Nevo actually sending a truck to the jobsite. This feature consists of uploading configurations to www.mynevo.com, then asking the client to turn the unit off and back on, then pressing the OK button once the reset process has started. Nevo appropriate configuration (based on the installer ID and MAC Address). You can upload a configuration to www.mynevo.com to make it available for your client to install on their Nevo if you have updated their configuration, rather than as an initial installation. You must have performed the last configuration download to Nevo in the settings menu. In addition, the Nevo Nevo S70 withoutS70 will automatically go to the website and download theS70 themselves. Generally, you will do thisS70 directly (via USB cable or local WiFi connection) with WiFi enabled
S70 installation must specify thatS70 is allowed to connect to the internet.Note: updated via www.mynevo.com NevoQ50 controllers are not WiFi enabled and therefore cannot be
|
|
|
| OP | Post 5 made on Sunday June 7, 2009 at 02:31 |
Thanks Duct Tape.....I knew it was somewhere on their site support but just not sure where .
John
|
Ninth Wave Audio Video Design 540 Cumberland St Memphis, TN 38112 www.9thwave.com |
|
| Post 6 made on Wednesday July 1, 2009 at 08:35 |
vbova27 Super Member |
Joined:
Posts: | July 2006
2,987 |
|
|
On June 7, 2009 at 02:31, jcallery said...
Thanks Duct Tape.....I knew it was somewhere on their site support but just not sure where .
John Every protected line should take this cue from Nevo and run with it.
|
|
| Post 7 made on Wednesday July 1, 2009 at 13:49 |
Ry-dog Long Time Member |
Joined:
Posts: | July 2005
169 |
|
|
I've used this feature a few times and while it works great, here are a few tips:
-wifi has to be enabled in the config for the remote. if you don't enable wifi, the remote won't know how to jump onto the client's home network.
-You can't just send a brand new un-programmed S70 to the client. The remote has to be configured in person the first time (so that you can put in the proper wifi settings).
The thing i love about the feature is that Nevo sends you an email the instant your client executes this successfully.
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
