I have the two Z-wave dimmers working fine, but would like to look into how to program them all on or all off. Maybe eventual but a button that would set both to a preset value. When I drag and drop the device it will only take one device though.

Also, are Leviton z-wave dimmers max value 100 or 255 as in some of the pre-made widgets that I cannot figure out how to reprogram.

Thanks, ML

Ok, I tried some more and I cannot put a "Home Control Device" in. It won't find the devices that I have installed for the dimmers that are link together in the Q50. Any suggestions why I can't see the devices while setting up the Home Control Device?

Thanks, ML

If you go to the Hardware Tab on the right hand sode column of the screen while in the default layout of NSP you should be able to pull down the menu to reveal all of your home control devices. Choose the device from that list and add the Basic set or multi-level set options to add to the device. There is a great Z-wave reference PDF in the downloads section of the dealer site that will walk you through this step by step too.

The way to do this is to set-up Z-wave Scenes with multiple devices added to the scene. You would need a Z-wave device that has scen programming capability and then controil that device from the Nevo

Thanks Jim,
One thing I found is I was trying this on a different computer and using a saved file instead of the computer I started the programming on. Apparently there are some files/devices that don't get saved on the program file. It work when I tried it on the correct pb, but still having problems getting the buttons to work correctly. have to spend some time on it. The on button worked on the widget but the off button didn't. Go figure.

Update: Found things work fine with a discrete button, but not with the home control widgets for Basic switches. But the sliders work fine! Go figure!!