Your Universal Remote Control Center
RemoteCentral.com
UEI Nevo Remote Controls Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
accessing the browser through s70
This thread has 10 replies. Displaying all posts.
Post 1 made on Sunday November 16, 2008 at 12:45
kieran2008
Long Time Member
Joined:
Posts:
October 2008
12
hiya guys hope all well

after spending dome time looking through the forums i cant find any help regardin getting the browser to work on my s70......when im in studio pro i add addresses to buttons and wen uploaded and buttin clicked all i get is a blank html page

im connected to my wireless network so it says !!

really would appreciate some help....
thx in advance

kieran
Post 2 made on Sunday November 16, 2008 at 19:50
TechINSTALLER
Lurking Member
Joined:
Posts:
November 2008
8
Did you try in the emulator in Studio? High light the Icon you want to be the link to the web. once outlined then go to the properties and action tab in the lower right corner. Click action, click the Globe and enter the info required.... If the remote says you connect then you connect...You may want to check the Access point or Wireless router an see if the Remote MAC is in the attached devices list. If not trouble shoot... You pretty savvy with networks and IPs
OP | Post 3 made on Monday November 17, 2008 at 12:58
kieran2008
Long Time Member
Joined:
Posts:
October 2008
12
hi thx for getting bk to me...appreciate your time

have tried running emulator and its seems fine, made the url google which shows up ok.but not on the remote itself........

structure....router ssid section8 with usual password bla bla
gateway 192.168.2.1

also does not show im connected on router in dhcp list only laptop im working on....shows up not the remote

remote...wifi connected to section8 through static ip..cant connect on dynamic ???
shows list of available wireless networks

studiopro settings..nevo system settings wifi tab.setup to connect to section8 with passphrase ect

wen i try on the remote i get blank page saying cannot find server or dns error

its a headache really would appricate some time if u got spare

thxu
Post 4 made on Monday November 17, 2008 at 19:09
TechINSTALLER
Lurking Member
Joined:
Posts:
November 2008
8
I'll help you out

Do and IPCONFIG at the prompt on the PC that is working and post it. What kind of ROUTER or AP?

Yes it should easily do DHCP....
Post 5 made on Monday November 17, 2008 at 22:02
motech
Super Member
Joined:
Posts:
August 2008
3,374
does your remote show full reception on top bar?
or does it just show a dot ?

try removing password from wireless router jsut to test it . .
OP | Post 6 made on Tuesday November 18, 2008 at 01:20
kieran2008
Long Time Member
Joined:
Posts:
October 2008
12
hi there... ip config status
Windows IP Configuration


Ethernet adapter Bluetooth Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . : Belkin
IPv4 Address. . . . . . . . . . . : 192.168.2.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.2.1

Ethernet adapter section8 local:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 6:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 7:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : Belkin

Tunnel adapter Local Area Connection* 11:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 13:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
OP | Post 7 made on Tuesday November 18, 2008 at 01:24
kieran2008
Long Time Member
Joined:
Posts:
October 2008
12
yes wireless shows on top of screen full bars.......says im connected to my wireless network.but does not show in my router.and that is static not dhcp on the remote..........doesnt seem to connect to my network on dhcp.althought the router is on dhcp

thx for your help guys

k
Post 8 made on Tuesday November 18, 2008 at 08:08
avdorks
Long Time Member
Joined:
Posts:
November 2008
68
Can you ping the remote? Or traceroute to it? You do not see it listed on in the active clients?
SSID is case sensitive...

Have you tried it with no WEP?
Post 9 made on Monday November 24, 2008 at 12:39
cdnxpat
Long Time Member
Joined:
Posts:
November 2006
23
if it can help i couldn't access my WIFI after lot's of help and suggestions form dealer i decided to de install and re install all even the windows mobile software
and voila works like a charm
cdnxpat
OP | Post 10 made on Tuesday November 25, 2008 at 11:58
kieran2008
Long Time Member
Joined:
Posts:
October 2008
12
fantastic !!!!!!!!!!!! wehey...........
finally got it workin........thx for the tip

done and working
had the remote a month now ands now its just got better


appreicate all the time guys
Post 11 made on Friday August 21, 2009 at 00:42
Igor Shalamov
Lurking Member
Joined:
Posts:
May 2007
7
kieran2008, can you please give me the steps on how you got this working?

Thanks!


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse