Hello! I've been trying to program the NEVO Q50 but ran into sometrouble. The discrete HDMI inputs for my KDL60A3000 doesnt work. Does anyone know the HEX codes for the HDMI 1, 2, and 3? please help.

Many of the Sony rear projection TVs use a lot of the same codes, so if you can't find a set for your specific TV, try another Sony RP. You can find lots of configuration files for the 60" XBR, for example in the files section here on RC, and I found one that seemed to have just about every conceivable discrete code for my Sony TV.

Alternatively, use the Nevo database to try some other Sony TV remote sets. Personally, I find the Nevo database pretty generic and often lacking the more specific commands I want, so I end up looking elsewhere anyway.

Are you referring to the KDS60A3000? I ran into one of these at a site very recently and I found the model number in the Nevo database, but since I only had to use one input on the TV, I didn't get a chance to test the input commands found in there.

One thing you should try is to click on the "Advanced Keys" button near the upper right corner of NevoStudio Pro when you have your Sony TV selected. I opened up my old job and clicked in there and saw that there are additional "video" commands listed in there that aren't there when you first add the device.

As my Sony TV sits in there right now it only shows video1-5 commands, but when I clicked on the Advanced Keys button, I saw that there were video6-9 commands.

Maybe one of those might work out for you, give it a try.