Post 1 made on Saturday September 30, 2006 at 15:00 |
wyzard Long Time Member |
Joined: Posts: | December 2002 160 |
|
|
Good afternoon.
I have a NevoSL which I'm beginning to set up.
I have a UPnP NAS (network accessed storage) set up which I would like to connect to through the Nevo. How do I get the Nevo to even see my network? When press Media Zones, I get nothing on the remote. Where do I go to set up the wireless network? On the remote or in the software?
Thanks.
|
|
Post 2 made on Saturday September 30, 2006 at 19:16 |
Springs Super Member |
Joined: Posts: | May 2002 3,238 |
|
|
You have to get the nevo studio up and running to enable wirless. Then you have to type out the info on the unit itself. You can't access the NAS directly with the Nevo you need to have Nevo Server running on something...
|
|
OP | Post 3 made on Saturday September 30, 2006 at 20:33 |
wyzard Long Time Member |
Joined: Posts: | December 2002 160 |
|
|
Thanks Springs.
Actually, it does see my NAS without running the server software. I'm able to browse my media without a problem. Only problem I'm having is getting it to show photos and play videos using my Dlink DSM-520. Music plays fine.
|
|
Post 4 made on Monday October 2, 2006 at 11:52 |
JustPassing Long Time Member |
Joined: Posts: | November 2005 127 |
|
|
What kind of a NAS do you have in your setup? Is it running Twonky? I've been looking for a NAS with UPnP inside, but last one I tried(maxtor) just allowed me to browse, and did not play... So I had to run the Nevo server on a PC to share the music.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.