Hi everyone

I got my NevoSL a couple of weeks ago. I'm still impressed by this remote, after many years of problems with my old Pronto - among other problems, I could never manage to correctly control my Harman Kardon Signature 1.0 with it.

Everything's fine now, my devices have been all learned without much difficulty, I've done the macros effortlessly...

The only remaining point is the lights control. I couldn't find a plugin IR dimmer that works in my 220 volts 50 Hz area, otherwise the on in the Lutron Spacer System range would have been perfect. I chose a Australian-made Clipsal Ulti RF plugin dimmer, with an interface IR to RF to be done through a PowerMid.

The solution in itself is working - I already tried it successfully with RF switches modules, thanks to hex files downloaded on the net.

It works this way : NevoSL )) IR )) PowerMid Sender )) RF )) RF Switch.

Unfortunately, since I do not have any hex file for the Clipsal Ulti dimmer, I tried to learn it through the PowerMid Receiver, without any success. The NevoSL is learning a signal (which proves that the Clipsal system is working in 433.92 mHz), when I press on the learned code the PowerMid Sender's LED is lit, showing that something is sent, but there's no result...

Do you know if by any chance, it is possible to find somewhere an hex file that can send the right instruction to the PowerMid sender?

If not, is there a specific way to ensure that the PowerMid Receiver IR signal is learnt correctly by the NevoSL?

Thanks in advance for your help...

Nobody has an idea?...

you can use a upb switch and do a upb to ir converter its like 300 bucks... only ideas i have

ed