Hi all,

Nevo V2 will not accept my projection design discrete codes, my old pronto did!
what could the problem be?
here is some samples,
video1:
900a 006d 0000 0001 20df 04fb

power on:
900a 006d 0000 0001 20df 807f

power off:
900a 006d 0000 0001 20df 817e

Thanks for your help.

What device are those from?? Brand? Model?

I dont think the Nevo likes that format, I think its looking for the standard Hex

Similar to this:
0000 006D 0000 001A 007F 007F 001F 0060 001F 001F 001F 0060 001F 0060 001F 001F 001F 0060 001F 0060 001F 0060 001F 0060 001F 001F 001F 001F 001F 001F 001F 001F 001F 0060 001F 001F 001F 0060 001F 001F 001F 001F 001F 001F 001F 001F 001F 001F 001F 0060 001F 0060 001F 0060 001F 04E2

I think you you will need to convert the codes over or find them in another file

Yes, those are codes created by Philips. If you had the original code the pronto would change it to a 900 code. You need to give model and brand if you can't find them in the pronto discrete list under files

Thanks for the reply,

The equipment is a 'Projectiondesign, Action! Model One' projector
the power codes are from their web site and are the ones I have been using on my pronto, the 'video 1' code was learned on the pronto, some of the learned commands have longer strings but how do I convert the short ones?



http://www.projectiondesign.com/

Source for the Action One codes,

[Link: projectiondesign.com]

update:
I found the answer!, makeHex, worked perfectly, device 32 function 128 and 129
many thanks to johnfines program and posts.

Had the same problem when i was trying to copy discrete HEX codes form ProntoEdit to NevoStudio,
But I've never sorted it out ...

I have noticed some hex codes do not work when pasted in. Indicates the format is not Nevo SL ready. Learning works, if you can get the target code into some remote and learn it into the Nevo SL.

Dave