| Post 1 made on Monday August 28, 2006 at 14:40 |
clemens4 Lurking Member |
Joined:
Posts: | August 2006
2 |
|
|
Hi all,
I'm desperatly trying to connect the NevoSL to the Buffalo WHR-HP-G54 running the DD-WRT Software with WPA-PSK.
I have no Problem connecting without encryption (I didn't try WEP ... because it is as secure as using no encryption ;-)
Then I tried a Nortel Access Point 2220 with the same WPA-PSK settings that were not working with the Buffalo. It was working on the first sight. But after a while the connection could not be reestablished until I pressed reset on the NevoSL. The effect was the same as with the Buffalo:
In the Log there is Associating - Associated - Authenication - Cancelled Authentication with SSID - repeatingly.
Anybody having the same expericences ... or a solution?
Regards
Clemens
|
NevoSL, 2 NevoLink, XBox 360, Dreambox, Twonky, Buffalo WHR54/DD-WRT |
|
| Post 2 made on Thursday August 31, 2006 at 23:21 |
ddarche Mr. RemoteQuest |
Joined:
Posts: | February 2002
2,309 |
|
|
The only other thing to consider is to setup your wap as much as you can to follow the recommendations from UEI. They have published WAP settings in one of their white papers. Many have noted this has taken care of many odd problems. Available on my web site at: [Link: remotequest.com]Have fun...Dave
|
Dave D'Arche http://RemoteQuest.comFine Home Theater Remote Controls & Solutions - Programming services for most remotes |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
