Your Universal Remote Control Center
RemoteCentral.com
NEWS
REVIEWS
FEATURES
FILES
FORUMS
UEI Nevo Remote Controls Forum - View Post
Previous section Next section Up level
Find remotes at:
Amazon.com
What's New
Read more news »
New Reviews
Up level
[ SEARCH ]
[ CONTACT ]
The following page was printed from RemoteCentral.com:

Forums > Professional > UEI Nevo Remote Controls
Unable to reconfigure IP Info
Login:
Pass:
Register
 
Forum Search
 
Login

Topic:
Unable to reconfigure IP Info
This thread has 7 replies. Displaying all posts.
Post 1 made on Monday June 19, 2006 at 03:41
stindig
Long Time Member
Joined:
Posts:		April 2006
43
My NevoSL has been working on wifi (statically configured) for a couple of months. However, it seems to have lost it's configuration, following a recent 'IP address clash' - not sure how or why.

I am now trying to reconfigure the IP address details but on the subnet mask line, it lists:255.255.255.24 whereas it should be 255.255.255.248. I can amend this and click OK but when I return to the IP config screen, the last digits have returned to 24. I am unable to connect to my wifi network.

Has anyone else experienced this? Any suggestions?

Thanks, stindig
Reply
Post 2 made on Monday June 19, 2006 at 05:19
icutfc
Long Time Member
Joined:
Posts:		January 2006
192
How many Subnets' are in your system? Why are you changing the host numbers in your subnet? Is the UK default different from the US? How many systems are on your network? Does your ISP require the ((((255.255.255.248)))) setting? Are you changing the settings in your SL or on your NevoLink?

Save yourself some time and reset the default number to 255.255.255.0
Check your router( if you have one )to see if this setting is the same.
"BE CAREFUL WITH THE SWITCH!"
Restart the NEVO after you have made your changes.
Reply
OP | Post 3 made on Monday June 19, 2006 at 06:52
stindig
Long Time Member
Joined:
Posts:		April 2006
43
My ISP has allocated me a number of IP addresses on a predefined single subnet - 255.255.255.248.

I'm changing the settings on my SL. The Nevolink is working fine.

The thing is, this was working fine until a week ago. Why won't the SL accept the subnet mask now?
Reply
Post 4 made on Monday June 19, 2006 at 10:40
icutfc
Long Time Member
Joined:
Posts:		January 2006
192
stindig,

Try to load a simple file.... one device, one page, and one button.
"BE CAREFUL WITH THE SWITCH!"
Restart the NEVO after you have made your changes.
Load it and test the setting with the new file.

Why won't the SL accept the subnet mask
now?

This the firts time I've heard of this happening. Let's see if this works for you.
Reply
OP | Post 5 made on Monday July 10, 2006 at 04:30
stindig
Long Time Member
Joined:
Posts:		April 2006
43
On June 19, 2006 at 10:40, icutfc said...
stindig,

Try to load a simple file.... one device, one
page, and one button.
"BE CAREFUL WITH THE SWITCH!"
Restart the NEVO after you have made your changes.
Load it and test the setting with the new file.

This the firts time I've heard of this happening.
Let's see if this works for you.
Reply
OP | Post 6 made on Monday July 10, 2006 at 04:31
stindig
Long Time Member
Joined:
Posts:		April 2006
43
Took your advice and downloaded a small config. Instantly I could modify the IP address. I then reduced the size of my main config slightly and reloaded it - all working perfectly. Thanks for your advice.
Reply
OP | Post 7 made on Wednesday July 12, 2006 at 04:03
stindig
Long Time Member
Joined:
Posts:		April 2006
43
On July 10, 2006 at 04:31, stindig said...
Took your advice and downloaded a small config.
Instantly I could modify the IP address. I then
reduced the size of my main config slightly and
reloaded it - all working perfectly. Thanks for
your advice.
Reply
OP | Post 8 made on Wednesday July 12, 2006 at 04:07
stindig
Long Time Member
Joined:
Posts:		April 2006
43
The problem has returned. My NevoSL 'lost' its IP static address and now when I try and reconfigure it, it won't accept the last digit of the Subnet mask. I've tried a smaller file but with no success. I am certain that this is a bug.

NB I am using the following versions:

NevoSL: 2.0.0.582
Firmware: 2.0.1.16
Reply


Return to thread index...
Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Register for an account

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse