| Post 1 made on Tuesday April 4, 2006 at 14:10 |
Joel Schuenke Long Time Member |
Joined:
Posts: | March 2006
29 |
|
|
I have another issue that I hope soemone can offer some insight on. I have Comcast cable TV service using a Motorola DCT 6412 cable box. I have channel icons set up on the Nevo so I just push the channel icon and the Nevo is programmed to input the specific channel number. I am using the NevoLink since the Motorola box is in an enclosed cabinet. I am having an intermittent problem where the last two digits of the channel are getting duplicated. For example, I hit the icon for channel 206 and the command gets sent and it changes to channel 206 but then it is picking up a 0 and 6 command after that and then it changes to channel 6. I have put various amounts of delay between the channel inputs (100ms to 500ms) and I still get duplicates. I have the unused ports on the Nevolink plugged with the supplied connectors. Does the NevoLink still emit an IR command and that command is bouncing around inside the cabinet and causing this? Seems strange that it is only the last two numbers.
|
|
| Post 2 made on Tuesday April 4, 2006 at 22:49 |
mitch91175 Long Time Member |
Joined:
Posts: | March 2006
17 |
|
|
I was having a similar problem but I wasn't using the NevoLink. I found that the cause was the touchscreen is sensitive. Make sure that you are only pressing the channel icon once and not twice.
|
|
| Post 3 made on Wednesday April 5, 2006 at 11:51 |
Stealth X Senior Member |
Joined:
Posts: | November 2005
1,177 |
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
